The Smart Card Reader Drivers
Hi everyone
More and more threads started in the section about reader drivers.
Lets make things clear:
- There is no card-reader drivers in 4SE setup, because originally its shipped with SCR3310 USB Smart Card Reader which has native support for XP, Vista, Win7 and not requires any external drivers.
- If you have another reader you need to install corresponding driver before use it with 4SE software.
Here is drivers for some common card-readers:
Omnikey - USB CCID Smart Card Reader (USB\VID_076B&PID_A021) x86 / x64
Feitian - USB FT SCR2000 (USB\VID_096E&PID_0005) x86 / x64
SCM - SCR3310 USB Smart Card Reader (USB\VID_04E6&PID_5116) x86 / x64
In case you have other one - contact your reader supplier for a drivers.
How to update Smart-Card Reader Drivers
How to update Smart-Card Reader Drivers
In some cases it may be problems with automatically installed Drivers for Fetian FT SCR 2000
Smart-Card Readers. If during Box/Dongle firmware upgrade you will see the error like "Identification check
error: Server reported error [0010] Dongle authentication failed. Retry upgrade" this means you have
to update Smart-Card Reader Drivers.
http://desmond.imageshack.us/Himg641...ng&res=landing
1. Download updated drivers
1. 32 bit system
2. 64 bit system
2. Unpack drivers into folder at your PC
3. Connect Box/Dongle to PC
4. Go to Device Manager
http://desmond.imageshack.us/Himg33/...ng&res=landing
5. Make right mouse button click to "USB Token Device" and select "Properties". You will see
information about driver version
http://desmond.imageshack.us/Himg269...ng&res=landing
6. Click to "Update Driver..." button
7. Select "No, not this time" and click to "Next" button
8. Select "Install from a list or specific location (Advanced)" and click to "Next" button
9. Select "Do not search. I will choose the driver to install" and click to "Next" button
10. Click to "Have Disk..." button
11. Select folder with drivers
How to update Smart-Card Reader Drivers
continue..........................from#2 post
12. Click to "Continue Anyway" button
13. Go to Device Manager
14. Check drivers version after update