Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: unexpected Exception;BOX_AUTH_ERR0R;52

  1. #1
    GsmIndia.in Board Browser
    Join Date
    Feb 2008
    Age
    50
    Posts
    4

    Arrow unexpected Exception;BOX_AUTH_ERR0R;52

    hi bro


    my hwk ufs micro give this massage .slove tis matter .




    thank to all............

  2. #2
    GsmIndia.in Senior JeeTMobilEZonE's Avatar
    Join Date
    Dec 2006
    Location
    Boudh.Orissa,India
    Posts
    355

    Default Repair box auth errore 52/20

    Hi bro here is process

    DO NOT, perform this process unless you have Box Auth Error 20, update client reports "use Update Firmware to authorise UFS !" or you are advised to do so.

    1. Run the update client.
    2. Select your language.
    3. Click "Next".
    4. Wait until the "Update UFS Firmware" button is enabled and then click it.
    5. Select req.fbi file, you will need to get this file from the support area.
    6. After a few seconds the process will complete and create a file called xxxxxx.req. (where xxxxxx is your UFS serial number)
    7. Send this file to your UFS reseller.
    8. When you receive xxxxxx.fbi from your UFS reseller, perform steps 1-4 above.
    9. Select xxxxxx.fbi
    10. After a few seconds your box will be authorised.

    Your UFS reseller is the only person who can help with this process, do not ask here in the forum, i will generate xxxxxx.fbi files for you.

    NOTES:-

    1. the xxxxxx.fbi file sent by your UFS reseller is one time use only.
    2. once you have made the xxxxxx.req file, do not perform any other steps on the box, since this will cause the xxxxxx.fbi file to be out of sync.


    if the reseller do nothing the ask me i hav the way to slove it....
    if u need the req file. i atteched the file....
    if u need the fbi file then atteched the box sl. no. req file here and i give u the fbi file..
    Last edited by JeeTMobilEZonE; 06-11-2008 at 06:54 AM.

  3. #3
    GsmIndia.in Board Browser
    Join Date
    Mar 2008
    Age
    54
    Posts
    9

    Default

    Une xpected Exception Box_Auth_error 32
    ----------------------------------------
    i hav_HWK upgrade process completed V2.8
    wen connect
    ples halp me...thank

  4. #4
    GsmIndia.in Newbie
    Join Date
    Jun 2007
    Age
    52
    Posts
    18

    Default

    this works in error 20 not in error51 or 52

  5. #5
    GsmIndia.in Newbie
    Join Date
    Jul 2008
    Age
    41
    Posts
    13

    Default

    dot use any reg file to intal hwk it will remove our reg file from ufs and it will become box auth error

  6. #6
    GsmIndia.in Junior
    Join Date
    Jun 2008
    Age
    36
    Posts
    35

    Default

    use ufs setup 2.8.01
    ur prob will solve 100%
    tested by me

  7. #7
    GsmIndia.in Junior hitech3273's Avatar
    Join Date
    Aug 2007
    Age
    38
    Posts
    30

    Default

    here u using blue box of ufs + hwk this message appears on win xp
    if u tried on windows vista then it will work

  8. #8
    GsmIndia.in Newbie
    Join Date
    Jun 2007
    Age
    49
    Posts
    18

    Default

    Upgrade log:
    ---------- HWK Update Client v 2.0.8.0 ----------
    ---------- HWK upgrade started:1/31/2009 5:31:15 PM ----------
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : 56310
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TORNADO
    -- HWK ID : A1.04-PRO1-08647E33416000BB
    -- HWK Status : 1, DL: 0
    ----------
    Locating HWK Upgrade server...
    HWK Upgrade server found!
    Preparing connection to server...
    Connecting to HWKUpgrade server...
    Server connection successfully established.
    Authenticating on server...
    Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.

  9. #9
    GsmIndia.in Newbie
    Join Date
    Jul 2008
    Age
    41
    Posts
    13

    Default

    Upgrade log:
    ---------- HWK Update Client v 2.0.8.0 ----------
    ---------- HWK upgrade started:2/7/2009 12:58:57 PM ----------
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : *******
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TORNADO
    -- HWK ID : *************
    -- HWK Status : ********
    ----------
    Locating HWK Upgrade server...
    HWK Upgrade server found!
    Preparing connection to server...
    Connecting to HWKUpgrade server...
    Server connection successfully established.
    Authenticating on server...
    Authentication successfull.
    Checking upgrade client version...
    Your upgrade client is up-to-date.
    Upgrading HWK...
    HWK upgrade process completed.
    ---------- HWK upgrade finished:12:59:13 PM ----------
    upgrade is completed when i am canating my bos it shows Exception Box_Auth_error 32

  10. #10
    GsmIndia.in Junior
    Join Date
    Jun 2008
    Age
    36
    Posts
    35

    Default

    Quote Originally Posted by aboo View Post
    Upgrade log:
    ---------- HWK Update Client v 2.0.8.0 ----------
    ---------- HWK upgrade started:2/7/2009 12:58:57 PM ----------
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : *******
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TORNADO
    -- HWK ID : *************
    -- HWK Status : ********
    ----------
    Locating HWK Upgrade server...
    HWK Upgrade server found!
    Preparing connection to server...
    Connecting to HWKUpgrade server...
    Server connection successfully established.
    Authenticating on server...
    Authentication successfull.
    Checking upgrade client version...
    Your upgrade client is up-to-date.
    Upgrading HWK...
    HWK upgrade process completed.
    ---------- HWK upgrade finished:12:59:13 PM ----------
    upgrade is completed when i am canating my bos it shows Exception Box_Auth_error 32
    use ufs setup 2.8.01

  11. #11
    Section Moderator krishna's Avatar
    Join Date
    Jul 2006
    Location
    Krishnagiri,Tamilnadu, INDIA
    Age
    44
    Posts
    269

    Default

    just delete hwkkiller.dll and ufsloader.dll and restart ur pc
    it will solve the problem

  12. #12
    GsmIndia.in Newbie
    Join Date
    Jun 2007
    Age
    52
    Posts
    18

    Default

    there is no solution for error 52

  13. #13
    GsmIndia.in Newbie
    Join Date
    Aug 2008
    Age
    37
    Posts
    11

    Default

    Upgrade log:
    ---------- HWK Update Client v 2.0.8.1 ----------
    ---------- HWK upgrade started:1/24/2008 9:50:40 AM ----------
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : 40838
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TWISTER
    -- HWK ID : A1.04-PRO1-EA4F44E841600059
    -- HWK Status : 1, DL: 0
    -- Request file generated: 40838.req
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : 40838
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TWISTER
    -- HWK ID : A1.04-PRO1-EA4F44E841600059
    -- HWK Status : 1, DL: 0
    -- Done.
    ----------
    Locating HWK Upgrade server...
    HWK Upgrade server found!
    Preparing connection to server...
    Connecting to HWKUpgrade server...
    Server connection successfully established.
    Authenticating on server...
    Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.

  14. #14
    GsmIndia.in Newbie
    Join Date
    Aug 2008
    Age
    37
    Posts
    11

    Default

    Upgrade log:
    ---------- HWK Update Client v 2.0.8.1 ----------
    ---------- HWK upgrade started:1/24/2008 9:50:40 AM ----------
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : 40838
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TWISTER
    -- HWK ID : A1.04-PRO1-EA4F44E841600059
    -- HWK Status : 1, DL: 0
    -- Request file generated: 40838.req
    -- Target Id : 62 CF 1 10
    -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
    -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
    -- UFSx S/N : 40838
    -- Features : 00000001
    -- Licence 5 : True
    -- UFSx Vendor: TWISTER
    -- HWK ID : A1.04-PRO1-EA4F44E841600059
    -- HWK Status : 1, DL: 0
    -- Done.
    ----------
    Locating HWK Upgrade server...
    HWK Upgrade server found!
    Preparing connection to server...
    Connecting to HWKUpgrade server...
    Server connection successfully established.
    Authenticating on server...
    Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.
    unexpected exception:BOX_AUTH_ERROR:32
    plz reply me soon sir
    Last edited by naveend; 24-03-2009 at 09:33 AM.

  15. #15
    GsmIndia.in Junior
    Join Date
    Nov 2006
    Age
    40
    Posts
    32

    Default

    No need to do somthing just change your usb cable and try it again i think it will done tested by me

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. n95 unexpected error
    By jafekz in forum BB5
    Replies: 2
    Last Post: 19-03-2011, 08:16 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •