Samsung SM-J700F/H/K/M/P/8 BOOT Repair via eMMC Flashing

STEP 1:
Download NEWEST Flash File which have your Language Pack Inside from www.s-a-m-m-o-b-i-l-e.com or other sites...


STEP 2:
Solder eMMC Connections to Phone PCB:
(Thanks to Chand Gee for Finding the Pinouts)
http://174.120.45.27/tmp/SM-J700x_EMMC_PINOUT.jpg


STEP 3:
Use ATF Software 12.66 or Higher... Select eMMC Tool Tab from ATF Plus.
Follow the Steps illustrated in the Screenshots Below:

http://174.120.45.27/tmp/EMMC_WRITE_TAR_A.jpg


http://174.120.45.27/tmp/EMMC_WRITE_TAR_B.jpg


http://174.120.45.27/tmp/EMMC_WRITE_TAR_C.jpg


http://174.120.45.27/tmp/EMMC_WRITE_TAR_D.jpg



STEP 4:
De-Solder/Remove eMMC Connections on the PCB and Flash Phone via ODIN using the same flash file which you used on Step 3.

STEP 5:
Done.



*** REMEMBER ONE IMPORTANT THING ***

The Phone is DEAD because OLDER sboot.bin was written to it. To successfully repair it, you need to always use the NEWEST Flash Files and avoid using OLD Flash Files.