Huawei Modem Driver 4.23.03.00
Release Notes
Version 4.23.01.00
Fix the Lenovo will open in the whole test PCUI port,and register a Notification,in order to close the port before the port state changes(such as Disable),but we registered this change will result in Lenove Notification failed,so APP can not get port status change notification,in can not close the port.This led to a failure of the whole test items(Disable/Enable).
Fix the PC power state fome S0 to S3,asked board to reflect the correct side of the power state of the S0 to S3.
Fix the supporting E353s products,wake up after standby NDIS dial,dial-up barrier after the success of Ping.
Fix the Jungo driver Balong LTE platform supports the Northern Research products,combined into the AT^SYSINFOEX need to replace the original command does not support the AT^SYSINFO LTE products command.
Fix the In frequency of AWS or W900,download an upload concurrently,after 5 minutes,rate drop to Zero.
Fix the Six operating segments corresponding to the operator firm name does not appear in the WWAN at.
Version 4.23.02.00
Fix the issue that failed to get IP address while connecting after resume from standby on some special computers.
Fix the issue that failed to get correct NDIS connection state after resume from standby on some special computers.
Fix the issue that failed to ping with automatical test tool Airflux after connected with NDIS.
Version 4.23.03.00
Fix the inf files and PNF files can not remove when the driver uninstalled.
release notes.txt
DOWNLOAD
Don'T Forget To Say Thank,If You Like My Post.
Bookmarks