mobiistar s31 dead after flash

set was hanging on logo.I saved its flash file with volcano.then format it with volcano but problem not solve.then format it using SMART PHONE FLASHING TOOL, and set got dead,than I flash it with volcano,set came in hang position.then I flash it with SPF tool.
set got dead again,then I flash it with its back up using volcano,but set not alive again.
and give this error.

NFB bootloader downloading complete.
set chip is mtk 6575

Can someone provide me its original file.

pictures r attached............................

01. If You have backup then write it in 2.5.0 or 2.5.1 ...
02. If any error to write kindly change baud rate 460800 ...
03. Download below file and flash with SP Flash Tool v5.1352.01.

Rom Download link
http://www.mediafire.com/download/5e...r+touch+s31.7z

SP Flash Tool link
http://www.mediafire.com/download/6v...v5.1352.01.zip
Post result ....

brother u write in 1st line 2.5.0 or 2.5.1
I cant understand wt u want to say. if u mean volcano setup
then I have no this version setup.plz upload for me.thanx in advance.

dear brother flash file is password protected.

Quote:

---

Originally Posted by ajmal

brother u write in 1st line 2.5.0 or 2.5.1
I cant understand wt u want to say. if u mean volcano setup
then I have no this version setup.plz upload for me.thanx in advance.

---

Volcano box ver 2.5.0
Volcano box ver 2.5.1

File Password For Your Downloaded Rom is phuctoanstore

Rom link if need again Download

I flash it with version 2.5.0 but problem is same.

but with sp tool unable to complete flash, just start n stop.

here is image..............................

It seems that your usb driver is not properly installed.
Update usb driver with this and flash with sp tool then post result...
www.4shared.com/rar/pHtRCf4N/driver_mt6575.html