Originally Posted by
jamesjerss
Samsung I9300 GS3 ICS 4.0.4 arabic Firmware
Samsung I9300 PIT file:
odin downloader:
I9300XXALE9_OJVALE9_JED_Saudi_Arabia_Android_4.0.4 .zip | 757.2 MB
Firmware Update Steps:
Note: If it is a single file just select into PDA field nd flash it.
- After you run I9300 Odin Flasher check these options: Auto Reboot, Re-Partition, F.Reset Time.
- As you Check Re-Partition option that mean you need to select I9300 PIT file into PIT Field.
- Now select the Firmware Files from its extracted folder in this order:
PDA: CODE_I9300xxxxxx_554452_REV00_user_low_ship.tar.md 5
PHONE: MODEM_I9300xxxxx_REV02_REV04_CL1145430.tar.md5
CSC: CSC_Oxx_I9300Oxxxxxx_CL547448_REV00_user_low_noshi p.tar.md5
- At this step you can put the phone into Download Mode:
Press Volume Down button + Power button and after the message appears you have to press Volume Up button to enter the Download Mode of GS3.
- Look at the Odin program's window and if all is OK then you can see the Com number that the phone takes in light blue, If not then make sure that you installed the Samsung USB drivers correctly and try again.
- After the Odin detects your phone you can Click on START button to begin the Update process.
- The Odin flasher will start to check the Files and then will update your phone with the Firmware files that you have selected.
- During this try to not interrupt the operation and wait till the phone rebooted by Odin.
- In case all is OK then you will see PASS! word in Green at Odin program's window.
- Disconnect the GS3 and complete the setup wizard and it is recommended to do Full Reset for the phone with this Code: *2767*3855#.
Dnt frget 2 say tnks if yu lik my post
Dnt make posts to say tnks jus clic tnks
Bookmarks