Samsung I9300 GS3 ICS 4.0.4 arabic + english Firmware

Printable View

13-06-2012, 06:39 PM
jamesjerss

Samsung I9300 GS3 ICS 4.0.4 arabic + english Firmware

Samsung I9300 GS3 ICS 4.0.4 arabic Firmware

http://www.theandroidsoul.com/wp-con...I_8.jpg?9d7bd4

Samsung I9300 PIT file: http://www.mediafire.com/?bb918wlnomt3mep

odin downloader: http://www.mediafire.com/?e699jwhg50bcw9a

I9300XXALE9_OJVALE9_JED_Saudi_Arabia_Android_4.0.4 .zip | 757.2 MB

http://hotfile.com/dl/159626178/e4f7...4.0.4.zip.html

Firmware Update Steps:

Note: If it is a single file just select into PDA field nd flash it.

- After you run I9300 Odin Flasher check these options: Auto Reboot, Re-Partition, F.Reset Time.

- As you Check Re-Partition option that mean you need to select I9300 PIT file into PIT Field.

- Now select the Firmware Files from its extracted folder in this order:

PDA: CODE_I9300xxxxxx_554452_REV00_user_low_ship.tar.md 5

PHONE: MODEM_I9300xxxxx_REV02_REV04_CL1145430.tar.md5

CSC: CSC_Oxx_I9300Oxxxxxx_CL547448_REV00_user_low_noshi p.tar.md5

- At this step you can put the phone into Download Mode:

Press Volume Down button + Power button and after the message appears you have to press Volume Up button to enter the Download Mode of GS3.

- Look at the Odin program's window and if all is OK then you can see the Com number that the phone takes in light blue, If not then make sure that you installed the Samsung USB drivers correctly and try again.

- After the Odin detects your phone you can Click on START button to begin the Update process.

- The Odin flasher will start to check the Files and then will update your phone with the Firmware files that you have selected.

- During this try to not interrupt the operation and wait till the phone rebooted by Odin.

- In case all is OK then you will see PASS! word in Green at Odin program's window.

- Disconnect the GS3 and complete the setup wizard and it is recommended to do Full Reset for the phone with this Code: *2767*3855#.

Dnt frget 2 say tnks if yu lik my post
Dnt make posts to say tnks jus clic tnks
17-06-2012, 02:41 PM
nomeeali

Quote:

Originally Posted by jamesjerss

Samsung I9300 GS3 ICS 4.0.4 arabic Firmware

Samsung I9300 PIT file:

odin downloader:

I9300XXALE9_OJVALE9_JED_Saudi_Arabia_Android_4.0.4 .zip | 757.2 MB

Firmware Update Steps:

Note: If it is a single file just select into PDA field nd flash it.

- After you run I9300 Odin Flasher check these options: Auto Reboot, Re-Partition, F.Reset Time.

- As you Check Re-Partition option that mean you need to select I9300 PIT file into PIT Field.

- Now select the Firmware Files from its extracted folder in this order:

PDA: CODE_I9300xxxxxx_554452_REV00_user_low_ship.tar.md 5

PHONE: MODEM_I9300xxxxx_REV02_REV04_CL1145430.tar.md5

CSC: CSC_Oxx_I9300Oxxxxxx_CL547448_REV00_user_low_noshi p.tar.md5

- At this step you can put the phone into Download Mode:

Press Volume Down button + Power button and after the message appears you have to press Volume Up button to enter the Download Mode of GS3.

- Look at the Odin program's window and if all is OK then you can see the Com number that the phone takes in light blue, If not then make sure that you installed the Samsung USB drivers correctly and try again.

- After the Odin detects your phone you can Click on START button to begin the Update process.

- The Odin flasher will start to check the Files and then will update your phone with the Firmware files that you have selected.

- During this try to not interrupt the operation and wait till the phone rebooted by Odin.

- In case all is OK then you will see PASS! word in Green at Odin program's window.

- Disconnect the GS3 and complete the setup wizard and it is recommended to do Full Reset for the phone with this Code: *2767*3855#.

Dnt frget 2 say tnks if yu lik my post
Dnt make posts to say tnks jus clic tnks

is this full arabic ??
17-06-2012, 03:51 PM
jamesjerss

yes it is full arabic .......
19-06-2012, 09:38 PM
helpfull_hkt

good post Thank you yes it is full arabic ....... i cheak
23-06-2012, 03:20 PM
usmank

hai
I want full arabic
Is this file have arabic message typing
28-06-2012, 06:45 PM
blaiseid

I ve an S3 stuck on logo but odin stops at Nand write start...Any solution?
28-06-2012, 07:03 PM
jamesjerss

Quote:

Originally Posted by blaiseid

I ve an S3 stuck on logo but odin stops at Nand write start...Any solution?

before did yu root yur mobil?
is yur mobile gng into download mode? if not yur mobile is bricked.
only solution buy sboot repair clip

try 2 flash witout adding pitfile nd dnt select repartition.

http://img404.imageshack.us/img404/7821/rootodin2.jpg
28-06-2012, 07:32 PM
jamesjerss

Quote:

Originally Posted by blaiseid

I ve an S3 stuck on logo but odin stops at Nand write start...Any solution?

tutorial on how to solve Galaxy S3 stuck at Boot issues:

If you do not have Samsung’s KIES installed, download and install it. Correct USB drivers must be installed, so that programs can communicate with the device. Reboot computer after KIES installation.

Odin 3.04: Download Link
http://www.mediafire.com/?e699jwhg50bcw9a

CF-Root-SGS3-v6.0.zip:

Download Link.
http://download.chainfire.eu/185/CF-...-SGS3-v6.0.zip
( After download, please unzip this file. and you will get (CF-Root-SGS3-v6.0.tar)

Step 1: Turn your phones into download mode by pressing and holding VolumeDown + Home + Power simultaneously.

Step 2: Start ODIN on PC.

Step 3: Connect the device to your computer using USB.

Step 4: Wait a few seconds, the ODIN screen will show that a device is now connected. If ODIN not detect your device, mean you still not install the s3 driver/ Samsung kies properly or still not enable the Download Mode.

Step 6: Click the PDA button, then select CF-Root-SGS3-v6.0.tar (Note: this is .tar file and not is .zip file!)

Step 7: Press Odin “Start” button. ODIN will start flash the firmware.

Step 8: The device should reboot into CWM Recovery after flash complete.

Now continue to step below:

2. Wipe data, cache partition and Dalvik Cache.

Step 1: Now your Galaxy s3 boot into CWM Recovery .

Step 2: Select wipe data/factory reset and then choose yes. (Press volume button for selection and power button to enter)

Step 3: Select wipe cache partition and the choose yes. (Press volume button for selection and power button to enter)

Step 4: Go to advanced and do Wipe Dalvik Cache and the choose yes. (Press volume button for selection and power button to enter).

Step 6: Now you need power off your S3, so unplug the battery and then plug in again the battery.

Last step

Atlast Flash Official Galaxy s3 ROM via Odin
03-07-2012, 04:26 PM
ixinski666

Hi. Whenever i download pit file for i93000, I am recicing 4 or 5 files. Which one should I use ?
03-07-2012, 04:39 PM
jamesjerss

yu can flash without selecting pit file.but dnt forget to uncheck Re-partition
04-07-2012, 01:48 PM
hanimehio

does this version has any problem?
04-07-2012, 01:50 PM
jamesjerss

Quote:

Originally Posted by hanimehio

does this version has any problem?

no its official firmware.