iPhone 4 CDMA camera shutter stuck after screen replacement

[maccini]

Hi,

Does anyone know where the jumper is on the logic board? I would like to fix this asap. I have replaced over 100 screens and this is the first! I did see a post for an iPhone 4 GSM but the logic pcb is different.


Thanks in advance!

-Rich

[Rojer Fredrick]

Most of the times the front facing camera stops working after swapping out the screen. The reason for that issue is that you mess up two contact points when you pried it open. Many people talk about a software issue or a bad ribbon cable, but this is most likely not he case. Most of the times swapping out the camera won't work either. If this is the case please check the following. You need to check if the connection on the attached picture makes contact. If this is not the case you have to bring them back together. Use a small soldering iron and proceed with caution.
Thank you so much ...

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[tsudak]

where is contact. is it the same on verizon phone

[brhuff7]

I am needing help with this too but on a GSM model. I have seen both pictures of the stated logic board where the part is missing. But I don't understand, when I make the jumper, what points am I making contact with?

[you2hoo2002]

After replacing the screen I have also noticed my 3G is very spotty. Is there a jumper for that as well?

[niveq]

i am really interessed in finding that contact, because ive tried about everything

[Bcrash25]

I am experiencing the same problem

[penfold6883]

having the same problem.

[simonsong82]

hello I am posting 1 post to see the picture here

[beastmods]

posting once to see the link.....need to find jumper for a cdma iphone 4

[grndcomm]

Was there ever a picture posted of the logic board showing the potential problem area of contact?

[mobilegenius]

thanks for posting the image. helps a lot!


Mobile Genius

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[Danishbhai]

Just another victim hope to get this fixed soon

[Danishbhai]

hello,
the picture that you mentioned is it on this forum? any help would be greatly appreciated!
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[CPRRobert]

I cannot see the picture, does anyone have it?