IMEI Corrupted Solution

[forhad]

Would any one help me to solve the IMEI corruption of Nokia 1110.

[zahidnawaz]

i also need perfact solution

[rashid]

dear use it for UB box and purchase log for rpl file . then you can solve your porb

[richard_wifi]

bro,if use MT-BOX also can buy log file from griffin server

[stan1comm]

try this from jaf it,s work

[sneha@om_khatti]

try this from jaf it,s work

this is only patch not work

[richard_wifi]

after patch..
phone will be turn off after 36 second...it not work
you need to write RPL file then only ok

[bhogpurmail]

it work very well,i tested many times

[SHIJILFONOTLY]

never IMEI PATING NOT SUPPORTED ALL FIRMWARE VERSION
SOME HANDSET CLEAR THIS PROBLEM
RASHID SOLUTION IS BETTER

[ajmal]

Try with JAF if not then use UB with logs as Sir Rashid describe

[jumper-master]

I THINK THERE IS NO USEFULL INFO ABOUT THIS.

AND TO LET ALL WORLD KNOW HOW TO CHECK AND REPAIR THERE PHONES..
I WRITE ALL DETAILS ABOUT IT HERE ..
INFOMATION IS FOR ONLY PHONES DCT4 WD2 TIKU AND DCT4+ PHONES.

1 = YOU NEED JAF OR MT BOX OR F1 BOX OR GRIFFIN OLD BOX.

2 = YOU MUST CHECK PHONE IMEI/ESN DAMAGE RESONE..LIKE ITS FLASH AREA IMEI DAMAGE? OR ITS UEM AREA IMEI DAMAGE?

3 = FLASH AREA IMEI
a = THERE IS 2 TYPE OF IMEI DATA IN ANY DCT4 WD2 TIKU AND DCT4+ PHONES.SO IF WE FOUND WHICH WE HAVE TO REPAIR ITS MAKE YOUR WORK SO EASY TO REPAIR ANY IMEI/ESN DAMAGE PHONE..
b = FLASH AREA IMEI (DATA1 IN RPL)U HAVE TO CHECK UEM IMEI TO BE SURE THAT U HAVE LOSTED ONLY FLASH AREA IMEI.SOME TIME IN ERASE FLASH WE LOST FLASH AREA IMEI.SOME TIME IN FLASH IC DAMAGE OR WE CHANGED WE LOST FLASH AREA IMEI..
c = WE DON'T NEED TO CHANGE UEM TO REPAIR ONLY FLASH AREA IMEI.BECUSE THAT IMEI IN FLASH AREA CAN BE REWRITED..
d = FLASH AREA OR UEM AREA IMEI/ESN DAMAGE PHONE OFF IN 32SEC.
AND SHOW IMEI ?????????????????? AND ESN 000000000.

4 = UEM AREA IMEI ITS REPAIR WAY IS ONLY TO CHANGE UEM AND WRITE RPL WITH DATA1 AND DATA2 ..YES BOTH NEED.

5 = HOW DO WE KNOW THAT UEM IMEI IS CORRECT AND UEM IS OK??
a = THERE IS 2 WAY ONLY BOTH NOT PARFECT BUT TESTED ON 100 OR MORE PHONES BY ME ....
b = FIRST CHECK UEM IMEI WITH MT BOX OR JAF BOX WITH JAF USE OPTION READ UEM.. WITH MT BOX U HAVE TO PRESS READ ASK ITS SHOW U UEM IMEI.
c = COMAPER UEM IMEI WITH PHONE BACK WRITED .IF U CHANGED PHONE BACK USE THIS SITE TO CHECK YOUR IMEI NUMBER IS FOR YOUR MODEL OR NOT..LINK
d = ANY TOOL CAN READ ONLY 14DIGITE WE HAVE TO ADD LAST DIGITE TO CHECK AT THAT SITE.IF U DON'T KNOW LAST DIGITE JUST TRY ALL 0 TO 9 DIGITE TO CHECK..

6 = CONVERT ASK2RPL ..

7 = HOW TO WRITE RPL.EASY & SIMPLE JUST SELECT IN UFS WRITE UEM. IN JAF WRITE RPL.IN MT BOX WRITE RPL.
plzz replay ur reseluts
thnx

[kash786]

Thanks Stan It Really Work For Me Many Many Thanks Bro.....

[iqbalctgbd]

ime can repair by this system. but phone shut down automatically after few second and no signal.

[cardingdavid]

pacth is good but after 30 seconds the phone will automatic shut off, so the best way is use fufenu logs to calculate the rpl of your phone

[stan1comm]

in shut down case uem ic problem replace the ic than write the imei it,s will work