Sony Ericsson J230i User Code

**jalesar** · 31-12-2007, 05:31 PM

Hi mates
I have Sony Ericsson J230i with User Code please tell the procedure to reset the usercode deafult (0000).

**richard_wifi** · 31-12-2007, 05:52 PM

bro
no master code for this phone..u need use dongle (se-tool,mt-box,cruiser) to reset code or read code

**sureshkumar** · 08-02-2008, 08:08 PM

j230 dead please help... brother

**richard_wifi** · 09-02-2008, 07:31 AM

Originally Posted by sureshkumar

j230 dead please help... brother

bro....clean the PCB and check battery connecter..
1-check with power supply for short
2-check for water damage
3-try flashing

**smilegsm** · 18-04-2008, 12:25 PM

yes richard_wifi is good

**alamgarh** · 19-04-2008, 06:27 PM

SMART CLIP , CURISER, CRUISER. INFINTY. these box can solve ur problem and also search a DM-TOOL.

**RAVICELLCARE** · 19-04-2008, 11:07 PM

a k510i may be softwear problems.i flash se tool box the set may be on .but it blinking sonyeriction only. the set reboot freeqently. it is cid49.what problem any budy tell me solutions

**chapien0606** · 01-05-2008, 10:51 PM

hallo man i from Indonesia

**i_waheed** · 22-07-2009, 04:04 PM

Hello i'm a New plz hellp me i have a sony Ericsson j230i its a prob then i start the cell phone after onw min the LCD light is Off SO what can i do ????

Plz send me solution on my e-mail koe_or_hai@yahoo.com

Regards

**eaglech** · 07-08-2009, 01:52 AM

v0.915040/UNI
CARD SERIAL: 00100xxx
Loaded 51 flash descriptors
CFG:00000000000000
PROCEDURE WAS STOPPED BY USER
Can't load ID loader !

J230i
phone water damage, show "insert correct sim card"
suddently, screen show blue/grey(something like that)

phone is dead (blue/grey screen when power on ) and ..

when i connect to SETOOL3 with setool's cable, it quickly show red blink without press any button ( i dont touch any button)

update :
(now is blue/grey screen blinking, no more red blink )
when i inserted battery, blue/grey screen become permanent,when i take out battery, blue/grey blink

help pls