Results 1 to 5 of 5

Thread: EXTREAMLY..HOT..Convert Motorola E398 to E1

  1. #1
    GsmIndia Editor Sr. richard_wifi's Avatar
    Join Date
    Nov 2007
    Location
    Malaysia,melaka
    Age
    43
    Posts
    1,292

    Cool EXTREAMLY..HOT..Convert Motorola E398 to E1

    Convert ur standard Motorola E398 to E1 by following steps and u will have a wonderful Motorola E1 software..


    1ownload RSTlite v4.1 then install it...

    2ownload flash & backup v3.0.7 then install and register with keygen..

    3:Check your Bootloader version by holding down # and * when you
    power the phone on

    4:You must ensure that under Boot Loader you have 07.D0.If you have
    something else, DO NOT PROCEED.

    5:Backing up your phone with FlashBackup 2.62 and above

    - Load up FlashBackup and hit the 'Setup' tab.

    - Choose your language and hit the '...' button and choose where you
    want your backup to be saved.

    - Next hit the back up button along the top and you'll see a couple of
    combo boxes and buttons.

    - Under 'Backup Mode' Make sure 'Full Backup' is selected, and under
    'Phone Memory size' select 'Auto'

    - Now connect your phone and start in bootloader mode (*+#+power)
    and wait for
    FlashBackup to say 'Phone is Connected' in green in the bottom left.

    - Click 'Create' and a small message box with a progress bar will pop up
    and say sending loader to phone, creating backup and then
    compressing backup, the phone will then be shutdown and your
    backup will be in the folder that you specified in the setup tab.

    NOTE: It is also advised that you create a PDS backup by following the exact same process as above but selecting PDS backup rather than Full Backup

    6:Run RSTLite after backup..hit filename(....)then select the flash file with
    .shx name..

    7:Check for boot loader mode and device properties at ur left box and ur
    phone showed connected at port no1..

    8:Hit start button to start flashing.....Remember ur battery is fully
    charged before continuing flashing..

    9:If ur phone cannot be on after flashing and cannot enter boot loader
    menu follow the instruction in the E398 survival PDF file provided..


    Now ur E398 will have all the new appearances like E1, Itunes whereby it
    can play all ur memory card mp3 without using Itunes software to load mp3s..and very cool icon..lastly increased gain of sound output for ring and mp3...enjoy......
    Important all the file uploaded contains no virus if ur antivirus detect it as virus plz disable antivirus and proceed..

    Flash file...
    Code:
    http://rapidshare.com/files/84425171/english-chinese_language_45R-i_tunes_ok.shx.html

  2. #2
    GsmIndia.in Newbie
    Join Date
    Jul 2006
    Posts
    28

    Default

    nice one good info!!!!!!!!

  3. #3
    GsmIndia Editor Sr. richard_wifi's Avatar
    Join Date
    Nov 2007
    Location
    Malaysia,melaka
    Age
    43
    Posts
    1,292

    Thumbs up updates for E398-E1 flash...

    flash file for motE398 to E1 Walkman series..but songs in itunes need to load
    manually using i tunes software...enjoy

    http://www.filesend.net/download.php...5d337f3e73885d

  4. #4
    GsmIndia Editor Sr. richard_wifi's Avatar
    Join Date
    Nov 2007
    Location
    Malaysia,melaka
    Age
    43
    Posts
    1,292

    Thumbs up more uploaded.....cool E1......

    here's another version of E398 to E1..It is a I pod version of E1 with attractive cool icon with Itunes..flash and enjoy...

    http://up-file.com/download/c0912f61...-v3.0.rar.html

    mirror

    http://rapidshare.com/files/85317705..._v3.0.rar.html

  5. #5
    GsmIndia.in Newbie
    Join Date
    Jul 2007
    Location
    indonesia
    Posts
    19

    Default

    Flash file...
    Code:
    http://rapidshare.com/files/84425171/english-chinese_language_45R-i_tunes_ok.shx.html
    [/QUOTE]

    ........................................
    Sir Can u UpLoad Again This File............. LInk was Error................

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •