Karbonn KD100 Hang on logo,After Format Invalid IMEI
Chip=MTK
Action=Format
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=karbonn kd100
Comport=COM2
Baudrate=115200

CPU_Type=MT6253
CPU_ID=0000000F
NOR_ID=00EC220800000000
NOR_Size=32MB
NOR_Name=[SAMSUNG] K5N5666ATB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

Initializing...
DA_LIB_VER_5.6.1.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=1
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC220800000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: C5062K_01.05_660106_404XXX_NUM_006_018
Changing baudrate to 115200...
Done.
Formatting Flash...
All Done