How to Work dual-flash ic see here

[sdtelecom]

How to Work with Chinese Mobiles having Dual Flash-Ic Inside
If You work as described, u wont get your handset dead on doing any operation.

First of All Read Its Info and see if it is 4mb ic, 8mb ic, 16mb ic etc.

Read its Flash File in "Auto" with Baud rate 460800 setting like this




and if not readed..change baud-rates


4mb Flash Ic handset will say

Code:

Size:0x400000(4MB)
the phone has dual-flash ic,it reads flash size actually8(M)

8mb Flash Ic handset will say

Code:

Size:0x800000(8MB)
the phone has dual-flash ic,it reads flash size actually16(M)

16mb Flash Ic handset will say

Code:

Size:0x1000000(16MB)
the phone has dual-flash ic,it reads flash size actually32(M)

And thus the file u just readed and saved is of double size
(i.e. u got 8mb file of 4mb flash ic, 16mb file of 8mb flash ic, and 32mb flash file of 16mb flash ic)

But remember these files are not Correct Flash Files
and on writing them back you'll get your handset dead.
Also you cannot revive your Dead Handset by these files.

= = = = = = = = = = = = = = = = = = = * * * * * = = = = = = = = = = = = = = = = = = = =

Question : How to Read Correct Flash File ?
Answer : See here it is given below :

Before Reading Flash File Make these Settings

For 4mb flash ic -



For 8mb flash ic -



For 16mb flash ic -




After Making these settings Read Your Flash File.
Flash File Size will be Doubled again.
(i.e. u got 16mb file of 4mb flash ic, 32mb file of 8mb flash ic, and 64mb flash file of 16mb flash ic)
but Flash File just Readed is Very Correct..and on writing them back you'll get your handset alive.

[atc.com]

how can format dual ic in volcano box? spcialy in spd 6530.. dooes anyone know about this?..pls..post masters in chinaphone..

[dineshdias]

Although I read out the flash file with this setting, Why cant I write it to a phone??
Every time I try to write, stuck at 0%

[ajeetsharma]

sir for which models is dual ic comes

send list of model which support dual ic so we aware