MT625A & MT6260 (MTK USB Operations)

[Service Team]

MT625A & MT6260 (MTK USB Operations)

* How to Connect Mobile and Read Flash

Open Volcano Tool, Connect your mobile on volcano jig cable

Go to Detect tab and ddetect pinouts as shown in image below -




Press "Set pinouts" button and see in Device Manager Mtk Usb com port





Remove only Jig from mobile socket (Dont Remove Power cable)
Go to MTK tab





After Making above settings, Press RUN button, and when it says -

"Analysis of USB port, Please insert phone USB cable."

Insert Jig cable back in mobile's socket





Flash Reading Completed.


================================================== ====================

[Service Team]

How to Connect Mobile and Write Flash after Reading Completed

Press Reset Pinouts Button (MTK usb port will again show-up)





Now Remove only Jig from mobile socket (Dont Remove Power cable)

Press RUN button, and when it says -

"Analysis of USB port, Please insert phone USB cable."

Insert Jig cable back in mobile's socket







Flash Writing Completed.

[Service Team]

How to Connect Mobile and Write IMEI after Flash Writing Completed

Remove both Volcano cable and power cable from mobile
go to detect tab, and press "Set pinout" button





Power ON mobile with battery, and connect volcano JIG only (not power cable)
Phone will give 2-3 options, select "COM port" -





A new MTK Usb port will form in device manager
Now go to MTK tab and do as -





Type IMEI, Select MTK Usb port Com, and press Write IMEI





IMEI Written.





IMEI Restore Completed.

[net4u115]

How to Connect Mobile and Write Flash after Reading Completed

[One_Hermit]

How to Connect Mobile and Write Flash after Reading Completed

Already Posted @ 1st Post