Nokia 220 RM-969. Anybody successfully done flashing and Unlocking. It done with infinity box but I do not have Infinity box and any other box supported Nokia 220. I have tried with Volcano box but did not success.
Nokia 220 RM-969. Anybody successfully done flashing and Unlocking. It done with infinity box but I do not have Infinity box and any other box supported Nokia 220. I have tried with Volcano box but did not success.
I've tried also and failed
volcano not supported yet
kindly you have infinity best tool you can easily flash it....
Successfully flash with Infinity tool
Connect phone on selected interface...
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 11 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 0EE03AABA222744D0B3CE4DDF5E367BE
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Rivendell.13.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
Boot Ok
[MAUI] : MAUI seems as Alive, SDS Info exists
[ERROR] : DA_CBR_NOT_FOUND
Get settings...
Erase region , wait ...
Write region , wait ...
Write : RM-969_970_971_Rivendell_130011_REPAIR_MAUI_m62.lbl
All done! Reflash phone now with regular firmware!
Finishing session
All done!
Connect phone on selected interface...
Now phone is alive. Flash it with regular FWPhone found!
MTKx Nokia Phone detected
Read info... Ok
Core : v1.89 , MTKx FlashEngine : v3.0
Verify files ...
MAUI : RM-969_ROM_eMP_13.00.11
VIVA : RM-969_VIVA_eMP_13.00.11
LANG : RM-969_LANG_PACK_ROM_EI_eMP_13.00.11
CUST : RM-969_CUSTPACK_ROM_EI_EURO_RU_eMP_13.00.11
JMPT : RM-969_JUMP_TABLE_EI_EURO_RU_eMP_13.00.11
- > MODE : FullFlash
Software Info: 10.03.11 00-00-00 RM-969
IMEI: 353050065913269
PPM version : EI
Product code: 059V290
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 11 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 0EE03AABA222744D0B3CE4DDF5E367BE
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_13.00.11
SecureDecrypt : RM-969_VIVA_eMP_13.00.11
SecureDecrypt : RM-969_LANG_PACK_ROM_EI_eMP_13.00.11
SecureDecrypt : RM-969_CUSTPACK_ROM_EI_EURO_RU_eMP_13.00.11
SecureDecrypt : RM-969_JUMP_TABLE_EI_EURO_RU_eMP_13.00.11
OVRLP : 000069B900000001
PHPID : Rivendell.10.03.11.p1
=== Backup Enabled
Reading RPL backup...
IMEI : 353050065913269
RPL [Security] Saved to : 353050065913269.mtsec
=== Backup
OVRLP : 00004DF900000001
[ERROR] : DA_CBR_NOT_FOUND
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_13.00.11
Write : RM-969_LANG_PACK_ROM_EI_eMP_13.00.11
Write : RM-969_CUSTPACK_ROM_EI_EURO_RU_eMP_13.00.11
Write : RM-969_JUMP_TABLE_EI_EURO_RU_eMP_13.00.11
Write : RM-969_VIVA_eMP_13.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_13.00.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_EI_eMP_13.00.11
[VERIFY] DONE : RM-969_CUSTPACK_ROM_EI_EURO_RU_eMP_13.00.11
[VERIFY] DONE : RM-969_JUMP_TABLE_EI_EURO_RU_eMP_13.00.11
[VERIFY] DONE : RM-969_VIVA_eMP_13.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now
Flashing done!
Total flash time : 00:02:45
Reboot phone Ok
- > Hint : If phone shows Battery charge icon - press and hold PowerOn button 10 seconds
Wait, when phone will be ready ...
Reading Phone Info....
Software Info: 13.00.11 00-00-00 RM-969
IMEI: 353050065913269
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5
PPM version : EI
Product code: 059V290
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Connect phone on selected interface...
Phone found!
MTKx Nokia Phone detected
Read info... Ok
Don't spam forum, just HIT button
Successfully unlock Nokia-220 with help Infinity best tool
Nokia220_20-7-28_No-00.png
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks