Samsung GT-S6802 dead boot repair. I had checked to hardware and also check shorting.
Any solution for this mobile
Samsung GT-S6802 dead boot repair. I had checked to hardware and also check shorting.
Any solution for this mobile
If yur phone is not short nd completely dead den use Jtag Boxes to unbrick yur mobile.
Repairing bricked Samsung S6802 is easy with the RIFF Box. Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S6802:
Solder JTAG cable to Samsung S6802 JTAG pads;
01. Insert USB Data cable into board and PC;
02. Make sure Samsung S6802 is selected in the list of models;
03. Click Resurrect button;
04. Wait till software signals a successful operation completion;
05. Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
01. Disconnect PC cable;
02. Insert battery;
03. Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.
Last edited by obidulmomin; 16-06-2014 at 08:06 PM.
Any Solution without Jtag Boxes. via software or other.
Thank you
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks