Kindly Help All Respected Members..

[prince555]

HI ALL RESPECTED MEMBERS OF FORUM.
I HAVE A PPROB OF SONYERICSSION >>W200i<<<
COMPUTER KE SATAH LAGANAY SAY 4 AMPAIR SHO KARTA HAI .JESEY K ONN HO RAHAA HO MAGAR ONN NAHI HOTAA. KINDLY SEND SOFTWARE OF MY MOBILE .AN DTELL ME ATHAT HOW TO INSTAAL IT TO MY >>W200i<< .HOPE THAT ALL MEMBERS WILL DO SO 4 ME.
thankxxxxxxxxxx a loat adwance.
prince555.

[richard_wifi]

HI ALL RESPECTED MEMBERS OF FORUM.
I HAVE A PPROB OF SONYERICSSION >>W200i<<<
COMPUTER KE SATAH LAGANAY SAY 4 AMPAIR SHO KARTA HAI .JESEY K ONN HO RAHAA HO MAGAR ONN NAHI HOTAA. KINDLY SEND SOFTWARE OF MY MOBILE .AN DTELL ME ATHAT HOW TO INSTAAL IT TO MY >>W200i<< .HOPE THAT ALL MEMBERS WILL DO SO 4 ME.
thankxxxxxxxxxx a loat adwance.
prince555.

bro..read forum rules before post..post in english so that other members can help...

[smilegsm]

prince bhai ap ke pass koi flasher hai se tool ya koi or agar hai to tafseelan lakhin a muje add kar lain smile_mughal@hotmail.com
smile_mughal@yahoo.com

[prince555]

THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS 4 REPLY.
I DONT HAVE ANY TOOL 4 INSTALL .KINDLY SEND ME ALL THE NEEDED TOOLS AND S/W OF >>>>W200i<<<<< HOPE THAT U WILL HELP ME AS MUCH U CAN. AND I HAVE ADDED U .
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.
PRINCE555.

[bentech4u]

THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS 4 REPLY.
I DONT HAVE ANY TOOL 4 INSTALL .KINDLY SEND ME ALL THE NEEDED TOOLS AND S/W OF >>>>W200i<<<<< HOPE THAT U WILL HELP ME AS MUCH U CAN. AND I HAVE ADDED U .
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.
PRINCE555.

k k.. ill help u...

plz post ur correct problem..


fist u download Xs++ or bentech xs+2 frm http://bentech4u.4shared.com

dont forget to download the usb flash drivers frm the above site

STEP1: Installing USB Flash Driver.

Turn off your phone. Remove SIM and memory card, and re-insert battery. Do not turn ON.

Run XS++ now click START. While pressing and holding the ‘c’ button on your fone’s keypad, insert USB cable(Dcu-60). Windows will detect a new hardware and ‘Install new hardware’ wizard pops up. Release the ‘c’ button.

In the wizard, click ‘no, not at this time’ and next. Choose to install from a specified location and click next. Under ‘search for the best drivers to install’, check ‘include this location in the search’. Under ‘browse’, choose the path to the unpacked folder you downloaded and select the folder USB Flash Driver. Now click next and let the windows install the driver.
After installing the driver, close XS++ and disconnect phone and turn it off in case it has switched on. Remove battery for 2 seconds and re-insert it (to refresh your phone).
Now your phone is ready to be flashed. But first let us check your CID number.




k download the soft Setool lite 2 .....run the program

press the "identify" button & connect the fone while pressing & holding the "C" button...

den the se displays the fone information...


dis is simple tech for flashing..

i think w 200i flashing not support in normal DCU-60 cable..


the other way is use setool box or cruiser pro..(the most powerful tool)

me now using cruiser.....it is very comp to configure....but it supports almost all type of fones...

it supports unlocking without credit....

if u hav any doubt about cruiser...plz post here as a new topic...