Results 1 to 14 of 14

Thread: All China Mobiles Code

  1. 22-04-2008, 06:05 PM #1
    suresh_boy04
    suresh_boy04 is offline
    GsmIndia.in Active Teen suresh_boy04's Avatar
    Join Date
    Aug 2006
    Posts
    94

    Default All China Mobiles Code

    ALL CHINA MOBILES CODE


    *#66*# Set Factory Mode CONFIRMED
    *#8375# Show Software Version CONFIRMED
    *#1234# A2DP ACP Mode CONFIRMED
    *#1234# A2DP INT Mode CONFIRMED
    *#0000# + Send : Set Default Language CONFIRMED
    *#0007# + Send : Set Language to Russian CONFIRMED
    *#0033# + Send : Set Language to French CONFIRMED
    *#0034# + Send : Set Language to Spanish CONFIRMED
    *#0039# + Send : Set Language to Italian CONFIRMED
    *#0044# + Send : Set Language to English CONFIRMED
    *#0049# + Send : Set Language to German CONFIRMED
    *#0066# + Send : Set Language to Thai CONFIRMED
    *#0084# + Send : Set Language to Vietnamese CONFIRMED
    *#0966# + Send : Set Language to Arabic CONFIRMED
    Reply With Quote Reply With Quote
  2. 22-04-2008, 06:25 PM #2
    suresh_boy04
    suresh_boy04 is offline
    GsmIndia.in Active Teen suresh_boy04's Avatar
    Join Date
    Aug 2006
    Posts
    94

    Default Chinese Models Code

    CHINESE MODELS:

    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    set default language: *#0000# Send
    set English language: *#0044# Send
    set English language (new firmware): *#001# Send also

    ==========
    Reply With Quote Reply With Quote
  3. 22-04-2008, 06:26 PM #3
    suresh_boy04
    suresh_boy04 is offline
    GsmIndia.in Active Teen suresh_boy04's Avatar
    Join Date
    Aug 2006
    Posts
    94

    Default Service codes

    Service codes BenQ:

    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    chiniss cord & pin out
    some chinese Mobile Code And Pinouts ::::::::::::>>>>>>>>>>
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    [Quote] [Report] [Reply]
    [Adv.] China Phones Flash Box

    crack3war
    Reply With Quote Reply With Quote
  4. 22-04-2008, 06:28 PM #4
    suresh_boy04
    suresh_boy04 is offline
    GsmIndia.in Active Teen suresh_boy04's Avatar
    Join Date
    Aug 2006
    Posts
    94

    Default

    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    Last edited by suresh_boy04; 22-04-2008 at 06:53 PM.
    Reply With Quote Reply With Quote
  5. 20-07-2010, 10:06 PM #5
    sunuga
    sunuga is offline
    GsmIndia.in Board Browser
    Join Date
    Jul 2010
    Age
    36
    Posts
    1

    Default

    Nice..I found the unlock code here http://www.mobileunlocksolutions.com...-phone/rs1wp2/ and also i got the unlock instructions in the same site...
    Last edited by sunuga; 20-07-2010 at 10:10 PM.
    Reply With Quote Reply With Quote
  6. 26-07-2010, 07:48 PM #6
    hotlinemobile
    hotlinemobile is offline
    GsmIndia.in Junior
    Join Date
    Jul 2010
    Age
    44
    Posts
    30

    Default

    n 95 china securty code nade ? ??????????
    Reply With Quote Reply With Quote
  7. 15-10-2010, 07:15 AM #7
    i.rambabu
    i.rambabu is offline
    GsmIndia.in Junior
    Join Date
    Oct 2010
    Age
    46
    Posts
    33

    Default

    thankyou bayya data good collection very use full
    Reply With Quote Reply With Quote
  8. 15-10-2010, 10:25 AM #8
    ataur.rahman123
    ataur.rahman123 is offline
    GsmIndia Editor Sr. ataur.rahman123's Avatar
    Join Date
    Nov 2009
    Location
    India, Assam
    Age
    47
    Posts
    943

    Default

    nice post........................
    Reply With Quote Reply With Quote
  9. 16-10-2010, 08:59 AM #9
    furious15
    furious15 is offline
    GsmIndia.in Junior
    Join Date
    Sep 2010
    Posts
    41

    Default

    thanks you sir....nice post............
    Reply With Quote Reply With Quote
  10. 26-11-2010, 01:30 AM #10
    bajjuja
    bajjuja is offline
    GsmIndia.in Board Browser
    Join Date
    Nov 2010
    Age
    38
    Posts
    9

    Default

    thank you so much very nice post..................
    Reply With Quote Reply With Quote
  11. 17-12-2010, 03:45 PM #11
    sudha
    sudha is offline
    GsmIndia.in Junior
    Join Date
    Aug 2010
    Age
    45
    Posts
    34

    Default

    g five 6700i formating not working blinking the set problem solve me
    Reply With Quote Reply With Quote
  12. 05-01-2011, 07:31 PM #12
    Dinnu
    Dinnu is offline
    GsmIndia.in Board Browser
    Join Date
    Jan 2011
    Age
    35
    Posts
    1

    Default

    micromax q1 unlock code
    Reply With Quote Reply With Quote
  13. 14-09-2012, 11:08 AM #13
    faletimikel
    faletimikel is offline
    GsmIndia.in Junior
    Join Date
    Sep 2012
    Location
    Nigeria
    Posts
    32

    Default

    Thanks a bunch for all these codes. What should i do to china phone that is hanging and i've serviced it.
    Reply With Quote Reply With Quote
  14. 14-09-2012, 04:34 PM #14
    harsad2010
    harsad2010 is offline
    GsmIndia.in Active Teen
    Join Date
    Mar 2010
    Age
    38
    Posts
    149

    Default

    micromax x265 formet code plssssssssssssssssssssssssss
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. All in one master code
    By atulharnal in forum Motorola Hardware Repair Section
    Replies: 2
    Last Post: 03-01-2013, 12:59 PM
  2. All in one master code
    By atulharnal in forum Nokia Hardware Repair Section
    Replies: 8
    Last Post: 16-08-2011, 11:21 PM
  3. All in one master code
    By atulharnal in forum Samsung Hardware Repair Section
    Replies: 2
    Last Post: 23-11-2010, 08:03 AM
  4. All in one master code
    By atulharnal in forum Sony Ericsson Firmware
    Replies: 12
    Last Post: 04-11-2010, 04:37 PM
  5. All in one master code
    By atulharnal in forum Sony Ericssion Hardware Repair Section
    Replies: 10
    Last Post: 08-05-2010, 07:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules