6630 white secreen

[drjaved_akhter]

any member help.6630 only white secreen.i have jaf pkey and ufs3.
on jaf chk
Getting MCU ID
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP

MCU ID: 0xAAAA
Failed! Aborting!
Done!
Phone Restarted...
jaf info
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04wk47_m_v14.2
27-09-06
RM-1
(c) Nokia.
HW version: 5440
PCI version:
RFIC version:  150a160e
DSP version: pb04w47v26
Retu version: 32
Tahvo version: 41
Production serial number: SHD546879
Product code: 0520873
Module code:
Basic production code: 0600395
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 356657003563050
IMEI spare to net: 3A 65 56 07 30 65 03 05
IMEI SV to net: 33 65 56 07 30 65 03 75 F0
Master Code: 2034414437
Failed reading simlock data...
Phone type: RM-1, Software version: 04wk47_m_v14.2, Language Pack: not available
User code: 12345
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-1.ini
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!

[may3200]

try this............

[leline_1]

select bb5 group.I think u have selected dct4

[mr zakir]

any member help.6630 only white secreen.i have jaf pkey and ufs3.
on jaf chk
Getting MCU ID
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP

MCU ID: 0xAAAA
Failed! Aborting!
Done!
Phone Restarted...
jaf info
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04wk47_m_v14.2
27-09-06
RM-1
(c) Nokia.
HW version: 5440
PCI version:
RFIC version:  150a160e
DSP version: pb04w47v26
Retu version: 32
Tahvo version: 41
Production serial number: SHD546879
Product code: 0520873
Module code:
Basic production code: 0600395
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 356657003563050
IMEI spare to net: 3A 65 56 07 30 65 03 05
IMEI SV to net: 33 65 56 07 30 65 03 75 F0
Master Code: 2034414437
Failed reading simlock data...
Phone type: RM-1, Software version: 04wk47_m_v14.2, Language Pack: not available
User code: 12345
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-1.ini
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!

hi bro cek zocus. re hot or change zocus.