Samsung J700 Unlock Free

[jalalmz]

This method is maybe known for some of you , i test it for some models (like E250 ,J700 ..) and i think , it can work for all other models ..
It's easy ,no risk at all , no cable , no drivers , but need to be handled well

Today i test it on J700 , as we know ,many of us have a bad result after using box to unlock that fone ,, (bad Imei ,bad BT adress ... ) but with this method ,, EVERYTHING is FiNe

1- Power on fone ,, type : *#7465625#
you will identify wich code is active , wich is inactive

2- Remove battery ,, Put your sim card , not all of it ,, just to prepare it to be full inserted , put your battery back and power on fone ,, you must see " insert sim" not "invalid sim.."

3- type : *2767*3855#
your fone should restart after 1 min ,,
now ,, and before it restart , push your sim card ,,without removing battery

4- your fone should work and accept the sim card ,, but if you chek locks you will find that your fone is still Loked

5- now type : *7465685*638*00000000*00000000#
your UNLOCK CODE is 00000000 now , hh Enjoy

6- now , back to Locks table with : *#7465625# ,, and for each active code you can disable it ,,,here details :

* Disables CP lock : #7465625*27*00000000#
* Disables Network lock : #7465625*638*00000000#
* Disables SIM lock : #7465625*746*00000000#
* Disables SP lock : #7465625*77*00000000#
* Disables Subset lock : #7465625*782*00000000#


--------REGARDS

************************************************** **************************************************

^^^^@JALAL KHAN@^^^^

[kgsmbrasil]

The best..... tank you

[anwar030]

something rong in ur post .

1-Turn on the phone without sim card .
2-Pull off the battery cover and insert any non-accepted sim card (without turning off the handset)
3-Do full reset *2767*3855# , phone will reboot and goes to Menu .
4-Customize Sp-lock code *7465625*638*00000000*00000000#
5-Unlock your phone with new SP code #7465625*638*00000000#
6-Enjoy G600 unlocked
7-Enjoy j700 unlocked

[jalalmz]

ok but first u will check my methord

[CASTRANOVA]

nice work bro
thanks

[rhee2007]

thanks for idea sir....i try that.if someone to openline....

[mike-larry]

Hi. I have a Samsung SGH-E250 + USB cable + OneNand Flasher + E250XLFA2 firmware. Problem is phone only displays white screen. When load both bin & tfs files, click 'start', but nothing happens. Just says "Power on mobile", which is already charging via usb. No NSPro/other devices, just usb cable. Please help to flash.

[rahulsanan1]

thanks but this unlock idea is not for permanent unlock to permant unlock use nstpro...............

[sandeephanda78]

easy unlocker is best for samsung unlocking

[eroxxx]

I have a J700 for unlock just had to get the sim, turn it on and dial * # 7337 #, the phone will reboot and you're done.
To determine whether the requested features IMEI * # 06 # should appear only 000000....

[gasan]

Did you check the flex first before attempting software cos you say white screen,try flex and if problem still persist then try lcd before you do software.

[gasan]

J700 no service after lock code removed how to reslove this issue.

[anwar030]

befor unloking j700 ist ok . if yas than flash eprom

[anwar030]

j706 sucsasfully unlock

[devsam]

Sir,
i cannot unlock network lock as per your message FOR SAMSUNG J700 MOBILE

regards,