K790 Blinking display

[jesuraja]

K790 Blinking display.I have alredy flash in se tool.flash ok.But there is same complaint.Pls help me any one

[Y2kSalman]

can u show us the log of identify

[instomen]

K790 Blinking display.I have alredy flash in se tool.flash ok.But there is same complaint.Pls help me any one

thats must be gdfs corrupt, try flashing with test point

[jesuraja]

thats must be gdfs corrupt, try flashing with test point

Thanks for u reply.how to do that

[instomen]

Thanks for u reply.how to do that

Use the latest setool v0.914037
Tuesday, 1 July 2008

- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs repair.

usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.

[hyber_99]

Use the latest setool v0.914037
Tuesday, 1 July 2008

- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs repair.

usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.

the procedure is not easy if you don´t know

the stage 2 is not easy

@jesuraja
first post a identify and operation logs

regards

[instomen]

the procedure is not easy if you don´t know

the stage 2 is not easy

@jesuraja
first post a identify and operation logs

regards

hehehe..
only thats solution can fixs brow if gdfs damage.....
if can do test point off bb5 nokia, im sure that u can do that......

[hyber_99]

the BB5 t.p. is not the same on SE DB2020