Nokia 7210c flashing problem

[chhoton]

Hi everybody!
I was flashing two NOKIA 7210c Phones with JAF Box.
One Phone the flashing has done OK but on the other which showed only NOKIA at boot, I flashed the set with INF.
The flashing stopped at IMEI failed
Then when I tried to flash manually, it shows the following error "Booting phone...
Error sync the phone..."

for your better observation I am sending you the whole log below

please help me out
thanx in advance



JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.61%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,French
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.image_mh
APE Variant file: NONE
Languages in ppm: English,French
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...

[One_Hermit]

Hi everybody!
I was flashing two NOKIA 7210c Phones with JAF Box.
One Phone the flashing has done OK but on the other which showed only NOKIA at boot, I flashed the set with INF.
The flashing stopped at IMEI failed
Then when I tried to flash manually, it shows the following error "Booting phone...
Error sync the phone..."

for your better observation I am sending you the whole log below

please help me out
thanx in advance



JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.61%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,French
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.image_mh
APE Variant file: NONE
Languages in ppm: English,French
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...

SL Data Corrupted
You need RPL Service if you dont have any Backup..

[jumper-master]

SL Data Corrupted
You need RPL Service if you dont have any Backup..

are you sure this is rpl fault?? I dont think,when handset goes to local mode than inf comes other handset shows these type of errors i think that better experts know.

[jumper-master]

Hi everybody!
I was flashing two NOKIA 7210c Phones with JAF Box.
One Phone the flashing has done OK but on the other which showed only NOKIA at boot, I flashed the set with INF.
The flashing stopped at IMEI failed
Then when I tried to flash manually, it shows the following error "Booting phone...
Error sync the phone..."

for your better observation I am sending you the whole log below

please help me out
thanx in advance



JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.61%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,French
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.image_mh
APE Variant file: NONE
Languages in ppm: English,French
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...

flash using jaf with latest version
(7.23 is latest verion at this time) if not done than use usb flash if not than 1st use 2 down versions than latest version set will on INSHALLAH

[One_Hermit]

Hi everybody!
I was flashing two NOKIA 7210c Phones with JAF Box.
One Phone the flashing has done OK but on the other which showed only NOKIA at boot, I flashed the set with INF.
The flashing stopped at IMEI failed
Then when I tried to flash manually, it shows the following error "Booting phone...
Error sync the phone..."

for your better observation I am sending you the whole log below

please help me out
thanx in advance



JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.61%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,French
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.ppm_mh
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__06.51.image_mh
APE Variant file: NONE
Languages in ppm: English,French
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...

are you sure this is rpl fault?? I dont think,when handset goes to local mode than inf comes other handset shows these type of errors i think that better experts know.

This Error Comes when we Flash Mobile with Lover Version..

but his Problem is :
The flashing stopped at IMEI failed

______________________________________

First Flash Phone with Latest Firmware

If already Done & dont have any Backup

need RPL Service...

[jumper-master]

I also want to say that he is using lower version using latest version mostly these faults solved,this is not rpl fault any way i dont want any war with any man and MR.CHHOTON before writting rpl or any experiment 1st check what i say if not luck than do any thing what you want.

[chhoton]

I HAVE FLASHED THE PHONE WITH LATEST VER 7.23 AND THE FOLLOWING LOG APPEARED:


JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.25%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Backing up CRT data...
Setting FLASH MODE
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89820089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
Reading CMT HWC certificate...
Saved to C:\Program Files\ODEON\JAF\ProgData\35931002844121_CRT_backup _182147.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...




ANY SOLUTION?

[One_Hermit]

I HAVE FLASHED THE PHONE WITH LATEST VER 7.23 AND THE FOLLOWING LOG APPEARED:


JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.25%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Backing up CRT data...
Setting FLASH MODE
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89820089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
Reading CMT HWC certificate...
Saved to C:\Program Files\ODEON\JAF\ProgData\35931002844121_CRT_backup _182147.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...




ANY SOLUTION?

Try to Flash with HWK if you have..

[One_Hermit]

I HAVE FLASHED THE PHONE WITH LATEST VER 7.23 AND THE FOLLOWING LOG APPEARED:


JAF version 1.98.63
Detected PKEY: 9001E2CE
Card life counter: 44.25%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-436\rm436__07.23.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainia n
Backing up CRT data...
Setting FLASH MODE
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89820089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
Reading CMT HWC certificate...
Saved to C:\Program Files\ODEON\JAF\ProgData\35931002844121_CRT_backup _182147.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...




ANY SOLUTION?

IMEI of this Phone is OK so no need RPL

Just try to Flash again
if not Solve try to Unlock with JAF..

[jumper-master]

uncheck CRT 308 and CRT BKP than flash if not done than it is hardware problem

[feelunion]

Hello every 1

I got the same problem with 7210c
And finally I got it solved.

First thanks to gsmindia
Second thanks to jumper-master for great sharing.
Allah bless you brother.

And finally problem solved with this literally

flash using jaf with latest version
(7.23 is latest version at this time) if not done than use usb flash if not than 1st use 2 down versions than latest version set will on INSHALLAH

[genesismobiles]

7210c flashing error

Flash programming ...
CMT PAPUBKEYS: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026 (RAP Certificate 142 v.1) written.
Error chk C7012D0103CD000010000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x011A0400, Result: 0010
Flashing terminated with error(s) in 44.078 s
RX Buffer: C7012D0103CD000010000000F172

[genesismobiles]

7210c Flashing error in ufs

Flash programming ...
CMT PAPUBKEYS: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026 (RAP Certificate 142 v.1) written.
Error chk C7012D0103CD000010000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x011A0400, Result: 0010
Flashing terminated with error(s) in 44.078 s
RX Buffer: C7012D0103CD000010000000F172

[jayantassam]

7210c Flashing error in ufs

Flash programming ...
CMT PAPUBKEYS: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026 (RAP Certificate 142 v.1) written.
Error chk C7012D0103CD000010000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x011A0400, Result: 0010
Flashing terminated with error(s) in 44.078 s
RX Buffer: C7012D0103CD000010000000F172

check bsi link/cable/ clean up pinout and try ....