plz help for unexpectedexeption:BOX-AUTH-ERROR:20..
..(BUT OK WITH MX KEY)
plz help for unexpectedexeption:BOX-AUTH-ERROR:20..
..(BUT OK WITH MX KEY)
DO NOT, perform this process unless you have Box Auth Error 20, update client reports "use Update Firmware to authorise UFS !" or you are advised to do so.
1. Run the update client.
2. Select your language.
3. Click "Next".
4. Wait until the "Update UFS Firmware" button is enabled and then click it.
5. Select req.fbi file, you will need to get this file from the support area.
6. After a few seconds the process will complete and create a file called xxxxxx.req. (where xxxxxx is your UFS serial number)
7. Send this file to your UFS reseller.
8. When you receive xxxxxx.fbi from your UFS reseller, perform steps 1-4 above.
9. Select xxxxxx.fbi
10. After a few seconds your box will be authorised.
Your UFS reseller is the only person who can help with this process, do not ask here in the forum, we will not generate xxxxxx.fbi files for you.
NOTES:-
1. the xxxxxx.fbi file sent by your UFS reseller is one time use only.
2. once you have made the xxxxxx.req file, do not perform any other steps on the box, since this will cause the xxxxxx.fbi file to be out of sync.
my ufs hwk micro original massege me unexpectedexeption:BOX-AUTH-ERROR:51,what i do sir i did not understand.
sir i need a video how to unexpectedexeption:BOX-AUTH-ERROR:20 problem solve plz help me sir
[QUOTE=biswajit hore;163925]sir i need a video how to unexpectedexeption:BOX-AUTH-ERROR:20 problem solve plz help me sir,PLZ SOME ONE HELP ,I FACE BIG PROBLEM[,plz help me sir/QUOTE]
TeamViewer Download and cotect me 9614173640
Hello, can you help me to repair boot of mi ufs/hawk?
No boot any nokia
Work fine in samsung or other, but cannot boot Software Bb5 o JAF Emulate.
UFS not response
or Error Division By Cero..
When try to run JAF Soft cannot boot any phone (sync phone in all bb5)
Thnks in advance
POLACO
Dear friends same my broplam Unexpected Exception:Box_AUTH_ERROR:20 pls help me
use ufs tool first
then use update client v2.10
then re install hwk ufs setup suite
download update client v2.10.003(sp1) here
http://www.ziddu.com/download/115799...lient.zip.html
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks