Results 1 to 4 of 4

Thread: <<<o>>> <<< Resolve GREEN LIGHT Problems >>> <<<o>>>

  1. #1
    GsmIndia Editor maverick_lp28's Avatar
    Join Date
    Jun 2008
    Location
    TUNISIA
    Age
    38
    Posts
    413

    Default <<<o>>> <<< Resolve GREEN LIGHT Problems >>> <<<o>>>

    GREEN Light Problems can also be caused by Old FTDI Drivers.

    How to detect if your Problem is Hardware or Software?


    Software Problem Symptoms:

    1. ATF Box is NOT DETECTED by the ATF Software.
    2. Device Manager shows Driver Version "2007", "2006" etc...
    3. You have just recently installed JAF, UFS, SE, UB, etc... any other box that uses FTDI Chip


    Easy fix for GREEN Light Software Problems is:

    1. Remove ATF Box from USB Port

    2. Remove ATF Drivers using this:


    C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drive rs.bat


    3. Reconnect ATF Box to USB Port and install the Proper Drivers.




    If you are still having Problems after the reinstalling the Drivers, then maybe you need to
    modify the PCB. Read first this thread before modifying your PCB.






    Q: What is really the Problem ???
    A: One batch of LT1930 ordered from Linear Tech was plagued with problems.

    Q: Was this caused by Short-Circuit Phones ???
    A: No, sometimes they malfunction even when they are idle.

    Q: My Box is still OK, but getting Hot... Is this the same Problem ???
    A: Unfortunately, Yes...

    Q: So I need to buy Replacement Parts ?
    A: No, you just need to remove the LT1930 and it's 3 supporting components

    Q: So with "less" parts, do I get "less" features out of my Box ?
    A: No, all Functions will be the same and you get extra 1.5 GB bandwidth for
    the first 6 months (Box Warranty Period).

    Q: Do I loose 6 Months Warranty if I open my Box ?
    A: No, but you must put the "Special Firmware" inside the box in so that
    your Warranty will still be Valid.

    Q: My box is 100% ok, but I want free 1.5 GB extra Bandwidth. Can I put
    "Special Firmware" inside my box even without Modifying the PCB ?
    A: No, You will Kill your box. Special Firmware is only for Modified PCB. After
    putting Special Firmware inside the box, you cannot go back to Regular
    Firmware unless you make a Manual Request to the Product Supporters.

    Q: My Box already has Special Firmware Inside, what happens if I click
    "Restore Box" from the Software?
    A: It is 100% safe. The Server will detect your Special Firmware and restore
    the correct Firmware for your PCB.

    Q: Ok, I am ready to modify my ATF box, where do I get the FULL
    Instructions ?
    A: Here you go:

    http://www.advance-box.com/modify_pcb/modify_pcb.rar





    Please Post on this Thread if you have more Questions.

    B/R

  2. #2
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    39
    Posts
    8,743

    Default

    yes boss i have a Questions

    many hand sets like 3110c , 5130c ,7210s

    1)get error while flashing in ATF box
    wher the same set can be flashed in UFS or in mxkey sucessfully without any errors ?

    2)ATF stops in flashing mcu ppm or in cnt at 3% or some times at 98% ?

    3)is it needed to full flash for music player not enough memory ?
    (i flash only ppm & cnt of same version for music player problem )




    sir see here



    ATF log of STOP flashing


    Number of Image Files: 3
    Processing Image File : C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.96.mcusw
    CMT Type : BB5
    CMT Algorithm : BB5 ALGORITHM
    Secondary Sending Speed : 3250000Hz
    Algorithm Sending Speed : 6500000Hz
    Program Sending Speed : 6500000Hz
    Message Reading Speed : 98000Hz
    Number of Blocks : 1178
    Entry Point: 0x5057
    Page Format : -1
    MAX PAGE : 0x00004000
    Changing MODE : FLASH
    VBATT OFF ...
    VBATT ON
    Setting VBATT Done!...

    AdvanceFBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5

    ************************************************** ****
    TIME STARTS HERE
    ************************************************** ****

    BootFlashModeDCT5Ex Succeeded after 3 Attempts
    SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
    Number of Sub Blocks 7 (0x07)
    1 SYSTEM_ASIC_ID 01
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000001
    ID DWORD 1 : 00000226
    ID DWORD 2 : 00010006
    ID DWORD 3 : 030C1921
    ID DWORD 4 : 01033000
    2 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000296
    3 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000B22
    4 PUBLIC_ID 12
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 17000112
    ID DWORD 1 : 35B74650
    ID DWORD 2 : 211F3BAB
    ID DWORD 3 : D2FD1838
    ID DWORD 4 : BF51ED60
    5 ASIC_MODE_ID 13
    Block Length : 2 (02)
    BB ASIC Index : 0 (00) CMT
    Mode Id : 00
    6 ROOT_KEY_HASH 14
    Block Length : 17 (11)
    BB ASIC Index : 0 (00) CMT
    Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
    7 ROM_ID 15
    Block Length : 9 (09)
    BB ASIC Index : 0 (00) CMT
    CRC 0 : 273F6D55
    CRC 1 : DFAAF68F
    Checksum 57
    SearchForBootstrap_DCT5..
    CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    Secondary Loader Sent...
    ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
    MCU_CONFIGURATION_RESPONSE_BB5:
    MessageID : C1
    SubBlocks : 03
    1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Manufacturer Code : 00EC ->
    Device ID : 2400 -> Type not in database
    Extended/Fixed ID : 0000
    Revision ID : 8A31
    2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
    Block Length : 13
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Device Contents : 00000000000000000000
    3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : MMC 04
    Device Index : 00
    Manufacturer Code : FFFF -> Flash
    Device ID : 0000 -> BAD FLASH TYPE
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Checksum : D5
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    FLS1SendAlgoCodeEx..
    SendAlgoCode_DCT5..
    SearchForAlgorithm_DCT5..
    Looking for ALL Devices...
    Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
    BCM21351_PI155_XSR16_usbalg.fg
    First Algo byte : 56
    BCM21351_XSR16_usbalg.fg
    First Algo byte : 56
    h3_xsr15_flash_alg.fg
    First Algo byte : 00
    MICROv10_alg2nd.fg
    OMAP2420_XSR15_alg.fg
    First Algo byte : 56
    RAP3Gv3_algo.fg
    First Algo byte : C0
    Flash Descriptor
    Manufacturer Code : 00EC
    Device ID : 2400
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Size : 00400000 (4194304)
    VPP Info : 0009
    Erase10s : 28
    Block1s : 32
    BErase1s : 02
    Reserved0 : 00
    Reserved1 : 00
    Reserved2 : 00
    VPP INFO : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
    C: \AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
    SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
    TransmissionTypeRequest_DCT5...
    SuggestedType : 01 16BIT
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
    ReturnedType : 01 16BIT
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Uploading ALGO File...
    SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
    Pabub KEY Request
    PhoneInfoRequest_BB5 (Asic Index 00 )
    PHONE_INFO_RESPONSE_BB5
    PAPUB_KEYS_HASH_RESP_BB5 2A
    BB Asic Index : 01
    PAPUB Keys Hash : 000C917F11196FDB7378C18EF7260698CA4489DCA0
    Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
    Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
    Certificate 1
    Name : NPC
    ASIC Index : CMT 0
    Certificate 2
    Name : VAR
    ASIC Index : CMT 0
    Certificate 3
    Name : R&D
    ASIC Index : CMT 0
    Certificate 4
    Name : CCC
    ASIC Index : CMT 0
    Certificate 5
    Name : HWC
    ASIC Index : CMT 0
    STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 56 41 52 49 41 4E 54 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 85
    STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
    No partition info....
    VPP Enabled by Software
    Using Internal VPP
    StartErase_DCT5...
    BlockLength : 0x0036 (54)
    ERASE Blocks : 0x0001 (1)
    erase blocks : 1
    CurrPos : 03
    CurrEraseLen : 33
    0 ERASE_AREA_BB5 0x12
    Block Length : 0x33 (51)
    BB ASIC Index : 0x00 CMT
    Device Type : 0x00 NOR
    Device Index : 0x00
    0 : 00000000-000006BF
    1 : 000006C0-0001FFFF
    2 : 00040000-000BFFFF
    3 : 000C0000-0013FFFF
    4 : 00140000-0137FFFF
    5 : 01380000-0151FFFF

    ERASE_REQUEST_BB5 : 5006120B00000000000000000006BF120B000000000006C000 01FFFF120B00000000040000000BFFFF120B000000000C0000 0013FFFF120B000000001400000137FFFF120B000000013800 000151FFFFC4
    >> Time Elapsed 3 seconds
    >> Time Elapsed 6 seconds
    >> Time Elapsed 9 seconds
    >> Time Elapsed 12 seconds
    >> Time Elapsed 15 seconds
    >> Time Elapsed 18 seconds
    >> Time Elapsed 21 seconds
    >> Time Elapsed 24 seconds
    >> Time Elapsed 27 seconds
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00

    Successfully erased..
    Time Taken to Erase : 00:00:30
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
    ReturnedType : 04 DDRand2TX
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Is Flashing CLOCK AUTO : -1
    Processing : rm495__07.96.mcusw
    Total blocks to write : 1178
    >> CMT Rootkey Hash CERT : NOLO
    >> CMT Rootkey Hash CERT : KEYS
    >> CMT Rootkey Hash CERT : PRIMAPP
    >> CMT Rootkey Hash CERT : PASUBTOC
    >> CMT Rootkey Hash CERT : PAPUBKEYS
    >> CMT Rootkey Hash CERT : UPDAPP
    >> CMT Rootkey Hash CERT : DSP0
    >> CMT Rootkey Hash CERT : MCUSW








    Number of Image Files: 3
    Processing Image File : C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.96.mcusw
    CMT Type : BB5
    CMT Algorithm : BB5 ALGORITHM
    Secondary Sending Speed : 3250000Hz
    Algorithm Sending Speed : 6500000Hz
    Program Sending Speed : 6500000Hz
    Message Reading Speed : 98000Hz
    Number of Blocks : 1178
    Entry Point: 0x5057
    Page Format : -1
    MAX PAGE : 0x00004000
    Changing MODE : FLASH

    AdvanceFBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5
    VBATT OFF ...
    VBATT ON
    Setting VBATT Done!...

    AdvanceFBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5
    VBATT OFF ...
    VBATT ON
    Setting VBATT Done!...
    VBATT OFF ...
    VBATT ON
    Setting VBATT Done!...

    AdvanceFBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5

    ************************************************** ****
    TIME STARTS HERE
    ************************************************** ****

    BootFlashModeDCT5Ex Succeeded after 3 Attempts
    SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
    Number of Sub Blocks 7 (0x07)
    1 SYSTEM_ASIC_ID 01
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000001
    ID DWORD 1 : 00000226
    ID DWORD 2 : 00010006
    ID DWORD 3 : 030C1921
    ID DWORD 4 : 01033000
    2 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000296
    3 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000B22
    4 PUBLIC_ID 12
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 17000112
    ID DWORD 1 : 35B74650
    ID DWORD 2 : 211F3BAB
    ID DWORD 3 : D2FD1838
    ID DWORD 4 : BF51ED60
    5 ASIC_MODE_ID 13
    Block Length : 2 (02)
    BB ASIC Index : 0 (00) CMT
    Mode Id : 00
    6 ROOT_KEY_HASH 14
    Block Length : 17 (11)
    BB ASIC Index : 0 (00) CMT
    Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
    7 ROM_ID 15
    Block Length : 9 (09)
    BB ASIC Index : 0 (00) CMT
    CRC 0 : 273F6D55
    CRC 1 : DFAAF68F
    Checksum 57
    SearchForBootstrap_DCT5..
    CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    Secondary Loader Sent...
    ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
    MCU_CONFIGURATION_RESPONSE_BB5:
    MessageID : C1
    SubBlocks : 03
    1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Manufacturer Code : 00EC ->
    Device ID : 2400 -> Type not in database
    Extended/Fixed ID : 0000
    Revision ID : 8A31
    2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
    Block Length : 13
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Device Contents : 00000000000000000000
    3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : MMC 04
    Device Index : 00
    Manufacturer Code : FFFF -> Flash
    Device ID : 0000 -> BAD FLASH TYPE
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Checksum : D5
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    FLS1SendAlgoCodeEx..
    SendAlgoCode_DCT5..
    SearchForAlgorithm_DCT5..
    Looking for ALL Devices...
    Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
    h3_xsr15_flash_alg.fg
    First Algo byte : 00
    OMAP2420_XSR15_alg.fg
    First Algo byte : 56
    RAP3Gv3_algo.fg
    First Algo byte : C0
    Flash Descriptor
    Manufacturer Code : 00EC
    Device ID : 2400
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Size : 00400000 (4194304)
    VPP Info : 0009
    Erase10s : 28
    Block1s : 32
    BErase1s : 02
    Reserved0 : 00
    Reserved1 : 00
    Reserved2 : 00
    VPP INFO : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
    C: \AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
    SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
    TransmissionTypeRequest_DCT5...
    SuggestedType : 01 16BIT
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
    ReturnedType : 01 16BIT
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Uploading ALGO File...
    SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
    Pabub KEY Request
    PhoneInfoRequest_BB5 (Asic Index 00 )
    PHONE_INFO_RESPONSE_BB5
    PAPUB_KEYS_HASH_RESP_BB5 2A
    BB Asic Index : 01
    PAPUB Keys Hash : 000C917F11196FDB7378C18EF7260698CA4489DCA0
    Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
    Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
    Certificate 1
    Name : NPC
    ASIC Index : CMT 0
    Certificate 2
    Name : VAR
    ASIC Index : CMT 0
    Certificate 3
    Name : R&D
    ASIC Index : CMT 0
    Certificate 4
    Name : CCC
    ASIC Index : CMT 0
    Certificate 5
    Name : HWC
    ASIC Index : CMT 0
    STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 56 41 52 49 41 4E 54 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 85
    STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
    No partition info....
    VPP Enabled by Software
    Using Internal VPP
    StartErase_DCT5...
    BlockLength : 0x0036 (54)
    ERASE Blocks : 0x0001 (1)
    erase blocks : 1
    CurrPos : 03
    CurrEraseLen : 33
    0 ERASE_AREA_BB5 0x12
    Block Length : 0x33 (51)
    BB ASIC Index : 0x00 CMT
    Device Type : 0x00 NOR
    Device Index : 0x00
    0 : 00000000-000006BF
    1 : 000006C0-0001FFFF
    2 : 00040000-000BFFFF
    3 : 000C0000-0013FFFF
    4 : 00140000-0137FFFF
    5 : 01380000-0151FFFF

    ERASE_REQUEST_BB5 : 5006120B00000000000000000006BF120B000000000006C000 01FFFF120B00000000040000000BFFFF120B000000000C0000 0013FFFF120B000000001400000137FFFF120B000000013800 000151FFFFC4
    >> Time Elapsed 3 seconds
    >> Time Elapsed 6 seconds
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00

    Successfully erased..
    Time Taken to Erase : 00:00:07
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
    ReturnedType : 04 DDRand2TX
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Is Flashing CLOCK AUTO : -1
    Processing : rm495__07.96.mcusw
    Total blocks to write : 1178
    >> CMT Rootkey Hash CERT : NOLO
    >> CMT Rootkey Hash CERT : KEYS
    >> CMT Rootkey Hash CERT : PRIMAPP
    >> CMT Rootkey Hash CERT : PASUBTOC
    >> CMT Rootkey Hash CERT : PAPUBKEYS
    >> CMT Rootkey Hash CERT : UPDAPP
    >> CMT Rootkey Hash CERT : DSP0
    Flashing FAILED
    BB5_WRITE_FlashFile_0
    Operations Failed....



    UFS log of full flash

    1ST BOOT : C0,07 [Rm-495] [2.1.0.1]
    RAPx ID : 000000010000022600010006030C192101033000
    EM 1 ID : 00000296
    EM 2 ID : 00000B22
    RAPx PBID : 1700011235B74650211F3BABD2FD1838BF51ED60
    RAPx MODE : 00
    RAPx HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAPx ROID : 273F6D55DFAAF68F
    CMT 1ST Boot OK
    CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
    CMT FLID0 : 00EC2400-00008A31, Sam K8x1259ETF
    CMT FLCNT : 00000000000000000000000000000000000000
    CMT MCID0 : FFFF0000-00000000
    CMT 2ND Boot OK
    CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
    CMT KSIG0 : 0C917F11196FDB7378C18EF7260698CA4489DCA0
    CMT VPP : Internal
    DUAL LINE : True
    CMT ALG Boot OK
    IMAGE : rm495__07.96.mcusw
    CMT NOR Erase Area: 0x00000000-000006BF
    CMT NOR Erase Area: 0x000006C0-0001FFFF
    CMT NOR Erase Area: 0x00040000-000BFFFF
    CMT NOR Erase Area: 0x000C0000-0013FFFF
    CMT NOR Erase Area: 0x00140000-0137FFFF
    CMT NOR Erase Area: 0x01380000-0151FFFF
    CMT FLASH ERASE OK, Time: 00:08
    Written: 8 Certificate(s)
    CMT FLASH WRITE OK, Time: 01:52
    Chip SECTOR_SIZE: 128k
    Warning, Must be Used 128Kb Sector_Size CNT File
    CONVERSION: Already 128K Paged Source
    IMAGE : rm495__07.96.image_mr_blu
    CMT NOR Erase Area: 0x01DC0000-0215FFFF
    CMT NOR Erase Area: 0x02160000-03FBFFFF
    CNT FLASH ERASE OK, Time: 01:39
    CNT FLASH WRITE OK, Time: 01:04
    IMAGE : rm495__07.96.ppm_mr
    CMT NOR Erase Area: 0x01520000-01DBFFFF
    PPM FLASH ERASE OK, Time: 00:31
    PPM FLASH WRITE OK, Time: 00:46
    Flashing Completed, Rebooting Mobile

  3. #3
    GsmIndia.in Active Teen
    Join Date
    Jul 2010
    Age
    35
    Posts
    59

    Default

    i am also waiting for answer plze

    i have same problem sir

  4. #4
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    39
    Posts
    8,743

    Default still wating

    mod i am still wwating for your responce

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •