ATF Standalone SD Repair, SX-4!! v6.60 Update!! 08 Feb 11!!

[akk.vpm]

ATF Standalone SD Repair, SX-4!! v6.60 Update!! 08 Feb 11!!




Common Changes:
New LogiCore 9.02.10 Firmware for ATF Chrome (Big ATF) and ATF Lightning (Small ATF)
Updated Nokia.ini with very old and very new Phone listings
New Nokia Connectivity Driver 7.1.36.00
Update Important Files Button is now RE-Activcated (Updates Loaders, PM, DCC files etc...)
Built-In Log File Viewer can now View the Current Session
Full Package Flash File Download Server automatically selects non BUSY servers
Fixed USER.INI files loading Bug (This also fixes Manually Loaded flash files)
Added Manual Selection of BOX TYPE for Restore Box Function
Updated the SKINS for the Software Interface

BB5 Changes:
Stand-Alone Super Dongle Keys Repair for all phones with Supported HASH
Stand-Alone SX-4 Authorization for all phones with Supported HASH
FBUS Loaders Updated to Release 10.50.000.1
Original Dynamic camera Configuration Files (DCC) Compatibility
Automatically Fixes DCC Problems using Original DCC files (not PM Files)
Erase Flash Chip can now SCAN active Flash Chips and automatically Erases Selected Flash Chips
CMT and APE PAPUBKEYS are now Compared during Buscheck (just in case it was damaged by other Boxes)
Flash Loader Information (Version, Revision, Protocol Type) are now Displayed during Buscheck
Added Manual ERASE PM 1 and PM 309 file: ERASE_1_309.pm
Added New Detection Method for 64k page Flash Chips for 5130c, 3110c etc...
By Default, RAP3Gv30 New Loaders are not used unless ENABLED in Expert Settings Menu
Fixed Old Protocol + Old Loaders flashing for N95, N95-8GB and other Phones with Secondary APE CPU
Backup Certificates (RPL) for APE Subsystem is now Enabled

iTablet Changes:
Now Supports EMMC Flashing for N900 RX-51 Variants

Infineon Changes:
C1-01 and other Infineon USB Phones can now be flashed with PPM and CNT files only. This will save you some time if you want to skip MCU Flashing. Just make sure that the currect MCU Firmware version matches the PPM and CNT files you want to upload. Actually, you can skip CNT flashing as well if you only want to change the Language Pack.

DCT4 Changes:
Original Dynamic camera Configuration Files (DCC) Compatibility
Automatically Fixes DCC Problems using Original DCC files (not PM Files)
TIPS and Tricks:

Before Updating your Box Firmware to LogiCore 9.02.10, make sure you have:

1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications

2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications

3. DO NOT disable the Microsoft Windows Firewall!!!

4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List

5. Make sure you have done Steps 1-2-3-4

For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use "Old Loaders" for Flashing.

Using "New Loaders" for N95 flashing is 100% safe, but depending on your CABLE QUALITY,
you might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE (Ready)".
If you do get stuck, then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection --> Old Loaders


Download From:
ATF [Advance Turbo Flasher] - Official Rapidshare Mirror
ATF [Advance Turbo Flasher] - Offical Hotfiles Mirror
ATF [Advance Turbo Flasher] - Official Download Area
ATF [Advance Turbo Flasher] - Official Download Area 2