nokia n73 problem with simcard(ANSWRED)

[manojbhuraji]

nokia n73

when power on without sim mobile complete work


when sim insert and mobile on then swich off problem

scan log



Phone Type: RM-133 (Nokia N73)
SW Version: V 05wk47v34.1 05-10-06 RM-133 (c) Nokia.
Imei plain: 35973800215984-8
Product Code: 0529785
ApeCoreSw: V 3.0638.0.0.1
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 359738002159848
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF









bus check


Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9100(23-12-2010), 1.0.0.15124(23-12-2010)
APE Data :
SYSTEM ASIC ID: 17100708 [OMAP1710 ver: 2.0]
ASIC MODE ID: 00
PUBLIC ID: 37C5EA97DED0BF397243790661D643C2DAFB538B
ROOT KEY HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B21
PUBLIC ID: 26300207A9B30054DBDB12646AAC51AE221517C2
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 00EC 22E8 - 0000 6921 [Samsung K8S2815ETB,128 Mbits] type: NOR,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
TransmissionMode: DDR&TX2
SecondaryBoot: helen3_2nd.fg [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
FlashID0: 00EC 00A1 - 0080 0015 [Samsung KAL00T00EM-DGYY/66,1 Gbits] type: NAND,APE
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: h3_sam_nand_xsr.fg [OMAP1710 UNISTORE-II-1.2.1 ALG] version: 1.49.0 revision: 0.0 size: 0x13AA0
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
APE PAPUBKEYS HASH: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Original Imei: 35973800215984
Original Product code: 0529785
Bluetooth ID: 0018C535A236

Phone Type: RM-133 (Nokia N73)
SW Version: V 05wk47v34.1 05-10-06 RM-133 (c) Nokia.
Imei plain: 35973800215984-8
Product Code: 0529785
Language Pack:
- not available.


Imei net: 359738002159848
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF



i want flash file this version pls help urgent

[TarikuL]

nokia n73
when power on without sim mobile complete work
when sim insert and mobile on then swich off problem
scan log
Phone Type: RM-133 (Nokia N73)
SW Version: V 05wk47v34.1 05-10-06 RM-133 (c) Nokia.
Imei plain: 35973800215984-8
Product Code: 0529785
ApeCoreSw: V 3.0638.0.0.1
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 359738002159848
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

i want flash file this version pls help urgent

Bro
Try Flash With This
HERE YOUR Requested FILE

V4.0839.42.2.1

[parvez5030]

sir. My nokia N73 dead phone when i flash it with mxkey, i face a problem.please help me, here is my phone loge
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08721DE
Using device: HTI, FW ver: 00.50, SN: 01008E69
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
Processing MCU file: N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
[BB5,BB5 ALGORITHM,BB5,OMAP1710 UNISTORE-II-1.2.1 ALG] size: 46.93 MB
Supported Ids: 0103192101003000, 010C192101003000
Supported Ids: 17100708
APE Data :
SYSTEM ASIC ID: 17100708 [OMAP1710 ver: 2.0]
ASIC MODE ID: 00
PUBLIC ID: A8E46D53A5AC43CEBE081A8CBB0E3EB90FB2D136
ROOT KEY HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0570010152750254CA01AEC9DF3B35483D5A85F3
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
No RAP Flash Chip Detected
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
SecondaryBoot: helen3_2nd.fg [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
Storage0: 00EC 00A1 - 0080 0015 [Samsung KAL00T00EM-DGYY/66,1 Gbits] type: FLASH,NAND, asic:APE
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: h3_sam_nand_xsr.fg [OMAP1710 UNISTORE-II-1.2.1 ALG] version: 1.49.0 revision: 0.0 size: 0x13AA0
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
APE PAPUBKEYS is blank/erased.
Partitioning ...OK
Erase size: 91.38 MB
CMT FLASH,NOR area [00080000-0073194D]
CMT FLASH,NOR area [00000000-0005FFFF]
CMT FLASH,NOR area [001E0000-001FFFFF]
CMT FLASH,NOR area [00880000-00FEFFFF]
erased in 0.016 s
Prog.status for Asic CMT ...
NAND: Status reported bad blocks.
NAND: OK
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00080000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

[One_Hermit]

NAND: Status reported bad blocks.
NAND: OK
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00080000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

Clean Phone Pinouts and Check..
If Same Change Cable and Check...

Post Result...

[parvez5030]

sir, i clean phone pinouts and change fbus cable but result is same.heare is my MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08721DE
Using device: HTI, FW ver: 00.50, SN: 01008E69
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
APE Data :
SYSTEM ASIC ID: 17100708 [OMAP1710 ver: 2.0]
ASIC MODE ID: 00
PUBLIC ID: A8E46D53A5AC43CEBE081A8CBB0E3EB90FB2D136
ROOT KEY HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0570010152750254CA01AEC9DF3B35483D5A85F3
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
No RAP Flash Chip Detected
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
SecondaryBoot: helen3_2nd.fg [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
Storage0: 00EC 00A1 - 0080 0015 [Samsung KAL00T00EM-DGYY/66,1 Gbits] type: FLASH,NAND, asic:APE
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: h3_sam_nand_xsr.fg [OMAP1710 UNISTORE-II-1.2.1 ALG] version: 1.49.0 revision: 0.0 size: 0x13AA0
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
APE PAPUBKEYS is blank/erased.
Processing MCU file: N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
[BB5,BB5 ALGORITHM,BB5,OMAP1710 UNISTORE-II-1.2.1 ALG] size: 46.93 MB
Supported Ids: 0103192101003000, 010C192101003000
Supported Ids: 17100708
Partitioning ...OK
Erase size: 91.38 MB
CMT FLASH,NOR area [00080000-0073194D]
CMT FLASH,NOR area [00000000-0005FFFF]
CMT FLASH,NOR area [001E0000-001FFFFF]
CMT FLASH,NOR area [00880000-00FEFFFF]
erased in 0.031 s
Prog.status for Asic CMT ...
NAND: Status reported bad blocks.
NAND: OK
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00080000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

[mukesh pathak]

sir, i clean phone pinouts and change fbus cable but result is same.heare is my MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08721DE
Using device: HTI, FW ver: 00.50, SN: 01008E69
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
APE Data :
SYSTEM ASIC ID: 17100708 [OMAP1710 ver: 2.0]
ASIC MODE ID: 00
PUBLIC ID: A8E46D53A5AC43CEBE081A8CBB0E3EB90FB2D136
ROOT KEY HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0570010152750254CA01AEC9DF3B35483D5A85F3
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
No RAP Flash Chip Detected
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
SecondaryBoot: helen3_2nd.fg [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
Storage0: 00EC 00A1 - 0080 0015 [Samsung KAL00T00EM-DGYY/66,1 Gbits] type: FLASH,NAND, asic:APE
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: h3_sam_nand_xsr.fg [OMAP1710 UNISTORE-II-1.2.1 ALG] version: 1.49.0 revision: 0.0 size: 0x13AA0
Supported Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
APE PAPUBKEYS is blank/erased.
Processing MCU file: N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
[BB5,BB5 ALGORITHM,BB5,OMAP1710 UNISTORE-II-1.2.1 ALG] size: 46.93 MB
Supported Ids: 0103192101003000, 010C192101003000
Supported Ids: 17100708
Partitioning ...OK
Erase size: 91.38 MB
CMT FLASH,NOR area [00080000-0073194D]
CMT FLASH,NOR area [00000000-0005FFFF]
CMT FLASH,NOR area [001E0000-001FFFFF]
CMT FLASH,NOR area [00880000-00FEFFFF]
erased in 0.031 s
Prog.status for Asic CMT ...
NAND: Status reported bad blocks.
NAND: OK
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00080000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

gentaly heat on flash ic and try, post your results.

[starmobi]

No RAP Flash Chip Detected

Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00080000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

bro check your cable..........

[suspeciousboi]

nice mAN it was really awsome..

[parvez5030]

sir, please give me nokia N73 cable pinout with tx rx gr volt man.

[One_Hermit]

sir, please give me nokia N73 cable pinout with tx rx gr volt man.

Use Eraser and Clean Pinouts...

N73 Cable Pinouts :

04140998.jpg

[parvez5030]

sir, i check cable pin-out and change two other fbus cable also re hot the flash ic but the problem is same.please give me another solution.

[One_Hermit]

sir, i check cable pin-out and change two other fbus cable also re hot the flash ic but the problem is same.please give me another solution.

Try to Flash with Other Box...

Check BSI Line...

[chwaqar]

try with atf box is done