n70 1st boot ok,2nd boot ok,err:cmt alg boot cert mism
n70 1st boot ok,2nd boot ok,err:cmt alg boot cert mism
Change your cable.
Use 7 pin ufs cable
Issue:
------
Nokia Phones Give Error:
"ERR: CMT ALG Boot CERT MISM" or "CMT 2nd Boot CERT Mismatch" on "Check" or "Flash"
Problem:
----------
Some UFS Manufacturers Used a National LP2951C M33 (3.3V) Regulator, Instead of a LP2951C M30 (3.0V) Regulator (IC - U6)
Workaround:
--------------
Change Regulator to LP2951C M30
If you are 100% Sure that your UFS has the Correct Regulator of M30 and you have checked the Output using a Voltage Meter, you should then Check the Phones Hardware.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks