nokia 1616 dead

[imranafzal]

my nokia 1616 not powering on but power on at ufs box whene i do flash it.plz help me. thanx

[TarikuL]

my nokia 1616 not powering on but power on at ufs box whene i do flash it.plz help me. thanx

See this post

Nokia 1800-1616-1280-dead-on-battery-power-on-box-solution


http://www.gsmindia.in/forum/198839-post2.html

[sbalaji]

my nokia 1616 not power on

[sbalaji]

Points: 206, Level: 2 Points: 206, Level: 2 Points: 206, Level: 2
Activity: 0% Activity: 0% Activity: 0%
Last Achievements [10 Days registered]

Join Date: Apr 2011
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts

Default
my nokia 1616 not power on any solution

[sbalaji]

sir nokia 1616 is dead & not connected with ufs

[starmobi]

sir nokia 1616 is dead & not connected with ufs

u r set water damage r other problem give me more information for mobile

[Service Team]

sir nokia 1616 is dead & not connected with ufs

check the flash ic rehot then check the power section


then connect the ufs

[excape100]

i have the same problem. my nokia 1616 does not power on. any help. than

[TarikuL]

i have the same problem. my nokia 1616 does not power on. any help. than

Check your Set's LCD.
Check Info with HWK
Check set's Self test.

[umeshtarte]

my dear 1} check
2} info but frist selete mcu file
3} test run self test LCD fail ERROR
4} chang og 1616 LCD or LCD 1661 code *#5511# or *#5512#
i thing your problem solution 99%


reply me TX

i have the same problem. my nokia 1616 does not power on. any help. than

[lancer2006_3000]

try to program boss in other box...

[striker60]

try to clean first the usb socket..

[amiable_j8u]

Check your Set's LCD.
Check Info with HWK
Check set's Self test.

sir i have nokia 1616 it was ok then is go off but sir after that i open this phone if i pic up lcd a little show light ony. after i change new lcd now sir display is right but no light in the lcd and no light in the phone as well sir plz help me in urgent?

[Service Team]

try to this display section

lcd track u check it brother....................

[neel2589]

Try this solution
1} connect power then check multimiter volt on power switch,if volt is v1.16 or 1.any not 2.8v. then Try this solution.