ufs big problem

[amiable_j8u]

Hi sir i have big big problem sir i m using ufs3 with hwk version.sir i have usb cable i dont have fbus. sir if i want to open security code or flash sir give cmt 2nd boot error i didnt flash even one phone sir here are the model number 2700c,5130c,2690 sir these phone have security codes sir i cant open security code and if i try to flash si showing cmt 2nd boot error and procceor failed it shows only all this models all other model are ok plz help me in urgnet i did flash e63 and n81 and etc sir i m waiting for ur replay

[One_Hermit]

hi sir i have big big problem sir i m using ufs3 with hwk version.sir i have usb cable i dont have fbus. sir if i want to open security code or flash sir give cmt 2nd boot error i didnt flash even one phone sir here are the model number 2700c,5130c,2690 sir these phone have security codes sir i cant open security code and if i try to flash si showing cmt 2nd boot error and procceor failed it shows only all this models all other model are ok plz help me in urgnet i did flash e63 and n81 and etc sir i m waiting for ur replay

Follow This :
1. Connect Phone with USB
2. Install Drivers
3. Select USB Interface
4. Do UI Settings...

[amiable_j8u]

Follow This :
1. Connect Phone with USB
2. Install Drivers
3. Select USB Interface
4. Do UI Settings...

thanks for help in urgent.
sir i did everything but same sir only problem with usb interface not with fbus plz help me step by step sir i did install pcsuite7.1 and sir no phone ask me for driver installtion plz sir help me further i m waiting ur replay/?

[amiable_j8u]

Follow This :
1. Connect Phone with USB
2. Install Drivers
3. Select USB Interface
4. Do UI Settings...

thanks sir for help in urgent.
sir i did all steps but still same sir only for those models only why sir and sir for driver installation what i have to do sir i installed pc suit 7.1 and sir it never ask me any phone driver plz sir help me step by step i m waiting ur replay
sir plz help me further

[One_Hermit]

thanks sir for help in urgent.
sir i did all steps but still same sir only for those models only why sir and sir for driver installation what i have to do sir i installed pc suit 7.1 and sir it never ask me any phone driver plz sir help me step by step i m waiting ur replay
sir plz help me further

1. Power On Phone
2. Connect USB Cable to PC & Mobile
3. Select PC Suite on Mobile when Asking [Same as Connect Phone to PC Suite]
4. System Detects Mobile and Automaticly Starts to Install Drivers for Modem and All
5. After Installing Drivers Select USB as Interface on HWK Suite [DCTxBB5]
6. Click INFO
7. If Phone Detects on DCTxBB5 do UI Settings