nokia 2690 white display

**vickyagrawal007** · 30-10-2011, 08:34 PM

hello every1.......... nokia 2690 white display problem.. jack supply is ok... i removed the camera also.. but same problem remains... any1 hav solution thn plzzzzzzzzzzz help...
thnx in advance......

**mukesh pathak** · 30-10-2011, 11:39 PM

bro. ensure that your incoming and outgoing calls ok,if yes , then change lcd or lcd ic, otherwise flash with latest verson, your problem will be solved.

**hmishra421** · 31-10-2011, 08:02 AM

Originally Posted by vickyagrawal007

hello every1.......... nokia 2690 white display problem.. jack supply is ok... i removed the camera also.. but same problem remains... any1 hav solution thn plzzzzzzzzzzz help...
thnx in advance......

firstly
check incoming & outgoing calls
if ok
then try this

The solution above shows a detailed information of the display data signal being feeds from the application processor IC to the LCD display pin connector. Each line is been filtered by a resistor that has resistance value of 33ohms each. You may check each resistor and trace each particular line paths, replace the resistor if found damaged or by then apply a jumper for an open line or cut connections.

**vickyagrawal007** · 31-10-2011, 01:32 PM

Originally Posted by mukesh pathak

bro. ensure that your incoming and outgoing calls ok,if yes , then change lcd or lcd ic, otherwise flash with latest verson, your problem will be solved.

pathak sir... i hav flashed it with latest version and evan changd lcd... incoming outgoing is ok... but white display remains onlyyy

**vickyagrawal007** · 31-10-2011, 01:36 PM

Originally Posted by mukesh pathak

bro. ensure that your incoming and outgoing calls ok,if yes , then change lcd or lcd ic, otherwise flash with latest verson, your problem will be solved.

sir where is lcd ic..??? can u plss giv me a diagrm or pic...