Results 1 to 7 of 7

Thread: N81-3 contact reatiler problem help me.

  1. 28-02-2012, 06:16 PM #1
    kushal gurung
    kushal gurung is offline
    GsmIndia.in Junior
    Join Date
    Feb 2012
    Posts
    31

    Default N81-3 contact reatiler problem help me.

    HERE IS PHONE LOG.
    Reading CERT data ...
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 089001045C7500529FC09B014446CAE0F5FB412B
    ASIC MODE ID: 00
    ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
    ROM ID: A8C1D6713E691FF8
    SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.34.0 revision: 2.0 size: 0x3B80
    Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
    eBB5ProtocolType: NEW
    TransmissionMode: DDR&TX2
    Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
    Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
    Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
    Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
    Storage4: 00EC 0030 - 0000 0221 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
    Suggested algorithm: XSR 1.5
    Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.34.0 revision: 2.0 size: 0x8FE30
    Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
    TransmissionMode: DDR&TX2
    FUR: Adding Asic CMT as client OK
    CMT PAPUBKEYS HASH: E70C21157D5AB5AF61AAD376910751FB06D6E9FD
    Reading CMT NPC (0x190 bytes).
    Reading CMT VARIANT (0x0 bytes).
    Reading CMT CCC (0x160 bytes).
    Reading CMT HWC (0xD4 bytes).
    Reading CMT R&D (0x0 bytes).
    Reading CMT PARTNERC (0x0 bytes).
    Flash Imei: 35193503052439
    NPC_DATA saved OK
    CCC_DATA saved OK
    HWC_DATA saved OK
    SIMLOCK_DATA saved OK
    SIMLOCK_KEY_DATA saved OK
    SUPERDONGLE_KEY_DATA saved OK
    CMLA_KEY_DATA saved OK
    WMDRM_PD_DATA saved OK
    RF_DATA saved OK
    WARRANTY_DATA saved OK
    PROD_DATA saved OK
    BT_DATA saved OK
    LOCK_DATA saved OK
    LOCK120_DATA saved OK
    BB_DATA saved OK
    WLAN_DATA saved OK
    RPL saved to "C:\mobileEx\3.5\data\backup\BB5_35193503052439_BA CK.rpl"
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 089001045C7500529FC09B014446CAE0F5FB412B
    ASIC MODE ID: 00
    ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
    ROM ID: A8C1D6713E691FF8
    SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.34.0 revision: 2.0 size: 0x3B80
    Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
    eBB5ProtocolType: NEW
    TransmissionMode: DDR&TX2
    Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
    Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
    Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
    Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
    Storage4: 00EC 0030 - 0000 0221 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
    Suggested algorithm: XSR 1.5
    Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.34.0 revision: 2.0 size: 0x8FE30
    Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
    TransmissionMode: DDR&TX2
    FUR: Adding Asic CMT as client OK
    CMT PAPUBKEYS HASH: E70C21157D5AB5AF61AAD376910751FB06D6E9FD
    Processing MCU file: RM223_21.0.010_prd.C00
    [BB5,XSR 1.5] size: 46.90 MB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101011105, 400C192101011105, 4003192101021103, 400C192101021103, 4003192101021105, 400C192101021105, 4003192101031103, 400C192101031103, 4003192101031105, 400C192101031105
    Storing certificate [NPC, CCC, HWC, R&D] ...OK
    Partitioning ...OK
    Erase size: 92.37 MB
    CMT FLASH,MuxOneNAND area [00040000-00082FFF]
    CMT FLASH,MuxOneNAND area [00083400-0087FFFF]
    CMT FLASH,MuxOneNAND area [00B80000-05F7FFFF]
    Formating partition ...
    Prog.status for Asic CMT ...
    NAND: OK
    Flash programming ...
    CMT ADA block sent
    CMT KEYS block sent
    CMT PRIMAPP block sent
    CMT RAP3NAND block sent
    CMT PASUBTOC block sent
    CMT PAPUBKEYS: E70C2115 [RAP Certificate 45 V1] sent
    CMT SOS*UPDAPP block sent
    CMT SOS*DSP0 block sent
    CMT SOS*ISASW block sent
    CMT SOS*CORE block sent
    CMT SOS+ROFS block sent
    Prog.status for Asic CMT ...
    NAND: OK
    Programming completed in 2 min 8.625 s
    Processing PPM file: RM223_21.0.010_prd_0101.V01
    [BB5,XSR 1.5] size: 31.99 MB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101011105, 400C192101011105, 4003192101021103, 400C192101021103, 4003192101021105, 400C192101021105, 4003192101031103, 400C192101031103, 4003192101031105, 400C192101031105
    Erase size: 40.31 MB
    CMT FLASH,MuxOneNAND area [03730000-05F7FFFF]
    Prog.status for Asic CMT ...
    NAND: OK
    Flash programming ...
    CMT SOS+ROFX block sent
    Prog.status for Asic CMT ...
    NAND: OK
    Programming completed in 1 min 31.734 s
    Processing CNT file: RM223_21.0.010_003_000_U02_uda.fpsx
    [BB5,XSR 1.5] size: 64.76 KB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101011105, 400C192101011105, 4003192101021103, 400C192101021103, 4003192101021105, 400C192101021105, 4003192101031103, 400C192101031103, 4003192101031105, 400C192101031105
    Erase size: 26.44 MB
    CMT FLASH,MuxOneNAND area [05F80000-079DFFFF]
    Prog.status for Asic CMT ...
    NAND: OK
    Flash programming ...
    Prog.status for Asic CMT ...
    NAND: OK
    Programming completed in 0.812 s
    Total time for flashing process(boot+erase+write) was 3 min 51.562 s

    Phone type: RM-223 (Nokia N81)
    SW version: V 06wk41v62.4 04-12-08 RM-223 (c) Nokia
    Imei plain: 35193503052439-3
    Product code: 0577599
    Battery voltage: 4621 mV, current: 98 mA
    ApeCoreSw: 21.0.010
    Language Pack:
    - not available.

    SLPA ver[2]: PA_SL2 (15 digit NCK)

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 351935030524393
    Version: SIMLOCK SERVER
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    FULL FACTORY... OK
    USER DATA... OK
    LEAVE FACTORY... OK
    SERVICE CENTER... OK
    SOFTWARE UPGRADE... OK
    PRODUCTION TUNING... OK
    Reset User Code (to default:12345) ... OK
    Completed in 1.703 s
    PHONE START-UP FAILED.
    CONTACT RETAILER.
    PLZ HELP ME.
    Reply With Quote Reply With Quote
  2. 28-02-2012, 06:33 PM #2
    shaiksha85
    shaiksha85 is offline
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    39
    Posts
    8,743

    Default

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 351935030524393
    Version: SIMLOCK SERVER
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    Every thing is Ok just format your mobile using box or hand format
    Reply With Quote Reply With Quote
  3. 28-02-2012, 06:47 PM #3
    kushal gurung
    kushal gurung is offline
    GsmIndia.in Junior
    Join Date
    Feb 2012
    Posts
    31

    Default

    Plz send me hard reset.
    Reply With Quote Reply With Quote
  4. 28-02-2012, 07:28 PM #4
    shaiksha85
    shaiksha85 is offline
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    39
    Posts
    8,743

    Default

    Quote Originally Posted by kushal gurung View Post
    Plz send me hard reset.
    * + 3 + send (green Key ) & Pwr
    Reply With Quote Reply With Quote
  5. 30-03-2012, 08:31 AM #5
    kushal gurung
    kushal gurung is offline
    GsmIndia.in Junior
    Join Date
    Feb 2012
    Posts
    31

    Default

    any other solution brother not solved.
    Reply With Quote Reply With Quote
  6. 30-03-2012, 10:12 AM #6
    gsmguru
    gsmguru is offline
    Moderator gsmguru's Avatar
    Join Date
    Mar 2011
    Location
    india goa quepem
    Posts
    563

    Default

    Quote Originally Posted by kushal gurung View Post
    any other solution brother not solved.
    try to flash with latest ver 24.0.2
    Reply With Quote Reply With Quote
  7. 02-04-2012, 05:25 PM #7
    kushal gurung
    kushal gurung is offline
    GsmIndia.in Junior
    Join Date
    Feb 2012
    Posts
    31

    Default

    thanks bro my problem solved latest ver 24.0.2
    thankss a lot.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SLOVE THE PROBLEM TO SELCT THE ALL CONTACT IN K-jam
    By gavaskar66377 in forum Other Brands
    Replies: 1
    Last Post: 16-10-2011, 05:48 PM
  2. 1600 contact service problem
    By kumarbijay in forum DCT4
    Replies: 8
    Last Post: 20-01-2011, 07:21 PM
  3. Big problem after solve contact service Rh-93
    By TarikuL in forum DCT4
    Replies: 14
    Last Post: 11-08-2010, 11:02 PM
  4. 2610 Contact service Problem
    By Elias in forum Nokia Firmwares
    Replies: 14
    Last Post: 31-10-2008, 11:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules