Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Tutorial on how to solve Galaxy S3 stuck at Boot issues

  1. #1
    GsmIndia.in Pro jamesjerss's Avatar
    Join Date
    Apr 2010
    Location
    nagercoil,saudi
    Posts
    1,862

    Default Tutorial on how to solve Galaxy S3 stuck at Boot issues

    Tutorial on how to solve Galaxy S3 stuck at Boot issues:

    If you do not have Samsung’s KIES installed, download and install it. Correct USB drivers must be installed, so that programs can communicate with the device. Reboot computer after KIES installation.

    Odin 3.04: Download Link
    http://www.mediafire.com/?e699jwhg50bcw9a

    CF-Root-SGS3-v6.0.zip:

    Download Link.
    http://download.chainfire.eu/185/CF-...-SGS3-v6.0.zip
    ( After download, please unzip this file. and you will get (CF-Root-SGS3-v6.0.tar)

    Step 1: Turn your phones into download mode by pressing and holding VolumeDown + Home + Power simultaneously.

    Step 2: Start ODIN on PC.

    Step 3: Connect the device to your computer using USB.

    Step 4: Wait a few seconds, the ODIN screen will show that a device is now connected. If ODIN not detect your device, mean you still not install the s3 driver/ Samsung kies properly or still not enable the Download Mode.

    Step 6: Click the PDA button, then select CF-Root-SGS3-v6.0.tar (Note: this is .tar file and not is .zip file!)

    Step 7: Press Odin “Start” button. ODIN will start flash the firmware.

    Step 8: The device should reboot into CWM Recovery after flash complete.

    Now continue to step below:

    2. Wipe data, cache partition and Dalvik Cache.

    Step 1: Now your Galaxy s3 boot into CWM Recovery .

    Step 2: Select wipe data/factory reset and then choose yes. (Press volume button for selection and power button to enter)

    Step 3: Select wipe cache partition and the choose yes. (Press volume button for selection and power button to enter)

    Step 4: Go to advanced and do Wipe Dalvik Cache and the choose yes. (Press volume button for selection and power button to enter).

    Step 6: Now you need power off your S3, so unplug the battery and then plug in again the battery.

    Last step

    Atlast Flash Official Galaxy s3 ROM via Odin



  2. #2
    GsmIndia.in Board Browser
    Join Date
    Oct 2012
    Posts
    1

    Default

    Thanks for the great information

  3. #3
    GsmIndia.in Board Browser
    Join Date
    Oct 2012
    Age
    30
    Posts
    1

    Default

    The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices


    It is required to us:
    1). SP Flash Tool program. SP_Flash_Tool_v3.1224.01.
    2). MT6575 USB VCOM drivers.
    3). A factory insertion for your smartphone.
    4). CheckSum_Generate program.
    5). (unessentially) Modified recovery.img for your smartphone.
    Download already ready Modified Recovery with all necessary files:
    Attachment 1376696

    Instruction:
    0). We unpack archives SP Flash Tool, MT6575 USB VCOM, CheckSum_Generate and archive with an insertion. We copy the CheckSum_Generate program in the folder with an insertion and we start it (in the folder the file of checksums Checksum.ini will be generated). If you have modified recovery, the recovery.img file in the folder with an insertion is replaced with your modified.
    1). We switch off the smartphone. The cable isn't connected to the computer.
    2). We take out and insert back the battery.
    3). (pass, if drivers are already established) we Connect phone to the computer a cable. The operating system will find the new device — specify to system the folder with the MT6575 USB VCOM driver (for the version of OS).
    4). (pass, if drivers are already established) we Disconnect a cable from the computer.
    5). We start the SP Flash Tool program.
    6). We press the Scatter-loading button and we choose the file MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt (it lies in the folder with an insertion).
    sp0.png
    7). We press the Download button.
    8). We connect phone to the computer a cable. The program should see and begin it an insertion. If phone isn't found, disconnect it from computers, pull out and insert the battery and anew connect to the computer.
    9). After the termination of an insertion we disconnect phone.
    sp6.png
    10). It is ready!!!!!

    The guide to installation of modified recovery (separately from a full insertion) for all MT6575/77 of devices


    Download already ready Modified Recovery with all necessary files:
    Attachment 1376696

    It is possible to establish modified recovery together with installation of an insertion of phone.

    But, if the insertion at you is already established, the system is already adjusted under you, and anew to stitch an insertion it would not be desirable, it is possible to establish modified recovery, without mentioning system and other parts of the device.

    For this purpose use "The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices". Only before an insertion (Download button pressing) remove ticks opposite to all points, except RECOVERY. The prevention of the SP Flash Tool program we answer Yes.
    sp7.png
    Hi I am in mere need for the official rom (Android 4.0.4) please share the links with me...
    Please i beg you for the official rom...

    The mediafire links are not working...

    Please please provide me the links... the phone is completely bricked...

  4. #4
    GsmIndia.in Board Browser
    Join Date
    Dec 2012
    Age
    39
    Posts
    1

    Default

    hope this works here i go

  5. #5
    GsmIndia.in Board Browser
    Join Date
    Dec 2012
    Posts
    1

    Default thanks!

    thanks!
    it was very helpfull

  6. #6
    GsmIndia.in Board Browser
    Join Date
    Jan 2013
    Posts
    1

    Default thank

    Quote Originally Posted by cellme22 View Post
    thanks!
    it was very helpfull
    Thank you very much this is helpful!

  7. #7
    GsmIndia.in Board Browser
    Join Date
    Mar 2013
    Age
    41
    Posts
    1

    Default

    Thanks you i had mine almost bricked....

  8. #8
    GsmIndia.in Board Browser
    Join Date
    Mar 2013
    Age
    38
    Posts
    1

    Default

    Thank god i found this thread... i was stuck... you guys are real life savers....

  9. #9
    GsmIndia.in Board Browser
    Join Date
    Apr 2013
    Age
    36
    Posts
    1

    Default

    muchos gracias. this was really helpful

  10. #10
    GsmIndia.in Board Browser
    Join Date
    Apr 2013
    Posts
    1

    Default

    hello my friends i have an at&t zte z221 that i need the 16digits unlock code for its ,

    Pls reply

  11. #11
    GsmIndia.in Board Browser
    Join Date
    Apr 2013
    Age
    30
    Posts
    2

    Default

    Hope it'll help trying...

  12. #12
    GsmIndia.in Board Browser
    Join Date
    Apr 2013
    Age
    30
    Posts
    2

    Default

    After the device reboot, it didn't go into CWM Recovery after flash complete..it still stuck on samsung galaxy s3 gt-i9300 logo... Please help..

  13. #13
    GsmIndia.in Pro jamesjerss's Avatar
    Join Date
    Apr 2010
    Location
    nagercoil,saudi
    Posts
    1,862

    Default

    Quote Originally Posted by Anntony1308 View Post
    After the device reboot, it didn't go into CWM Recovery after flash complete..it still stuck on samsung galaxy s3 gt-i9300 logo... Please help..
    Try 2 flash vit tis firmware

    SGSIII I9300 Prerooted Stock Odex/Deodex & Rescue FW

    I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_ROOT_ODEX CSC & MODEM Included

    BOOTLOADER_I9300_XXALEF

    ClockworkMod Touch Recovery 6.0.3.1

    1st put your mobile into download mode nd flash it using odin.while selecting the flash file include the boot loader file too.
    2nd after complete yur mob doesn't boot again put into download mode flash d ClockworkMod Touch Recovery 6.0.3.1 file using odin(impotent select d file into PDA field)
    3rd put yur mobile into recovery mode using volume up+home+power button there
    Select wipe data/factory reset and then choose yes
    Select wipe cache partition and the choose yes.
    Go to advanced and do Wipe Dalvik Cache and the choose yes

    Reboot yur mobile

  14. #14
    GsmIndia.in Board Browser
    Join Date
    Aug 2013
    Age
    52
    Posts
    2

    Default

    I am going to try. it is mine last hope.

  15. #15
    GsmIndia.in Board Browser
    Join Date
    Aug 2013
    Age
    52
    Posts
    2

    Default overheating.

    My s3 is overheating and resstart then. when I put them on ice coold surface, work normal. will this metod solve my problem? I will try and let you know.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Samsung S5360 - S5363 Galaxy Y arabic firmware Android_2.3.5+ tutorial
    By jamesjerss in forum Samsung Program and Flashers
    Replies: 12
    Last Post: 21-07-2013, 12:01 AM
  2. Tutorial 1st boot nokia c3 by ichal spy
    By wawan_berau in forum Nokia Hardware Repair Section
    Replies: 1
    Last Post: 05-09-2012, 12:37 PM
  3. [SOLUTION] iPhone shut off during boot / Stuck Apple Logo
    By facebook.com in forum Apple (Apple products, iPhone, iPod..)
    Replies: 0
    Last Post: 16-05-2012, 10:53 AM
  4. ORT JTAG - SHV-E120K [ Galaxy SII HD ] Repair Boot
    By shaiksha85 in forum Gsm Updates & News
    Replies: 0
    Last Post: 06-04-2012, 11:30 AM
  5. Samsung Galaxy Pro B7510 arabic nd english firmware+ Flasher+Tutorial
    By jamesjerss in forum Android based Phones (Smart Phones)
    Replies: 0
    Last Post: 11-07-2011, 10:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •