Nokia n73 start up

[Holobiak]

Hi guys i have problem with nokia n73, i replaced avilma ic, it's not helped after this i replaced betty ic, at this moment i have 2.8 volts on the power switch but phone not start up, i tryed flash it but i have some errors((( sorry for my bad englsh. please helppppppppppppppp


1ST BOOT : C0,0C [Rm-133] [2.2.0.3]
APE ASICID: 17100708
APE MODE : 00
APE PUBID : A0BD88DEE6CB98B69957AC8D8CC36208B4516DFF
APE HASH : 49A97E826B93BA20B7ED0B082475C005
APE ROMID : 1DFD66132C872FD4
CMT ASICID: 000000010000022600010006010C192101003000
EM 1 ID : 00000295
EM 2 ID : 00000B22
CMT PUBID : 22E0011383C20154DCCEA81DC2AE25EC694EC705
CMT MODE : 00
CMT HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROMID : 273F6D55DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : N73_4.0839.42.0.1_western_C00_PRD_cc.fpsx
CMT NOR Erase Area: 0x00080000-0073194D
CMT NOR Erase Area: 0x00000000-0005FFFF
CMT NOR Erase Area: 0x001E0000-001FFFFF
CMT NOR Erase Area: 0x00880000-00FEFFFF
CMT FLASH ERASE OK, Time: 00:02
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_BLK_ERROR at: 0x000C0400, 03
ERR: CMT FLASH WRITE D_BLK C7012D0103CD000010000000F172, LN: 0x002640, Time: 00:11
Process Failed, Repowering Mobile

[One_Hermit]

DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !

Always Use 7 Pin Cable to Flash BB5 Sets...

If Same With 7 Pin Cable Try to Flash with Other Box.. [MxBox / ATF or Any Supported Box]

[Holobiak]

Thanks, but i'm using this cable)

[Yash_MobileCare]

Thanks, but i'm using this cable)

Friends

Try to Change Fbus Cable Post Update.............

[Holobiak]

Thanks, i'm already do this(Change Fbus Cable ) resalt the same(

[Holobiak]

maybe its problem in pcb but i dont know ways of rx2

[pankaj9334]

Try to change pfo ic and post result.

[One_Hermit]

Thanks, i'm already do this(Change Fbus Cable ) resalt the same(

Flash with Other Box [MxBox / ATF or Other]

[Holobiak]

Try to change pfo ic and post result.

thanks)
i'm so sorry but i don't know whot is pfo ic please explain, sorry i'm new here and i don't know all of abbreviations)