help on 6111

[celldoct]

sir i changed the flex
i changed the display ic
changed the displar resistor
chnaged the board
but still white ....
incoming outgoing all ok
need solution for this

[hanikhurana]

sir i changed the flex
i changed the display ic
changed the displar resistor
chnaged the board
but still white ....
incoming outgoing all ok
need solution for this

try to flash the phone
maybe it wil be olright

[chennairam]

sir i changed the flex
i changed the display ic
changed the displar resistor
chnaged the board
but still white ....
incoming outgoing all ok
need solution for this

what you mean you changed MOther Borad also...?

[gasan]

sir i changed the flex
i changed the display ic
changed the displar resistor
chnaged the board
but still white ....
incoming outgoing all ok
need solution for this

DID YOU CHANGE MOTHERBOARD,AND STILL SAME PROBLEM,WELL THE SOLUTION IS YOU CHANGE SUB DISPLAY BOARD AN PROBLEM SOLVED

[celldoct]

i changed the board display...
any other solution plz post
AT

[hozy]

sir i changed the flex
i changed the display ic
changed the displar resistor
chnaged the board
but still white ....
incoming outgoing all ok
need solution for this

sir i have the same problem so plz can u tell me where is the display ic and displar resistor if u don't have the schematic diagram tell me and i'll send it for u

[meo786]

only flash the phone your problem will be solved

[gasan]

THANKS,BRO NEVER TRIED FLASHING WILL TRY THAT

[tallman]

i have 6111 sceen wight, i have changed flex,display lcd, and lcd board and still the same problem need help fast

[gasan]

Hi there

I have had a few of these phone problems and if the phone is in warranty,then send to Nokia cause they changed the mainboard so it stands to reason the the fault is on the mainboard.

[Norfdas]

6111 display is white, phone working Ok, except display.
Phone have been sit on, someone having solved the same problem?
Mainboard exhange?