1110 1600 no display

[THE ANT]

1110 1600 no display

[rashid]

dear br
check pin -5 is not goes there , so how is good solution?

[francis3]

dear br
check pin -5 is not goes there , so how is good solution?

can u post where is the right position of pin 5 boz...

[THE ANT]

Sorry For That
I Send U Right Post
The Ant
Br.....

[rashid]

can u post where is the right position of pin 5 boz...

dear br
pin-5 goes to UPP pin -C9, there are no outer link

[zaki537]

dear br
check pin -5 is not goes there , so how is good solution?

Rashid bhai is right pin 5 goes direct cpu you cannot jumper any other place just you can do only one thing that clean the pin 5 place then see with magnifi glass and alittle scratch with blade there u will find
a tiny point check its resistence with ohm meter it should be from 2 to 6 mega ohm if u got it its your pin 5 you can get it here note pin 5 resistense should be same like pin 2 3 and 4 i had repair to many sets using this method . sory my english is poor.ohm meter is best tool in repairing.
zaki537

[rashid]

Zaki 537
is absolutly right . i also do that , i have reapair more then 200 sets .
really great brother , i like you . and your style

[hanifyusuf]

dear rashid bhai , i cannot under stand resistance checking . please clarify all solution with picture please !!!!
i waiting for reply.

[hanifyusuf]

dear rashid bhai , i cannot under stand resistance checking . after detecting pin-5 where i have to jumper it please tell me !!!