Results 1 to 3 of 3

Thread: x1 xperia successfully change language from chinesse to english ...guide inside

  1. #1
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Cool x1 xperia successfully change language from chinesse to english ...guide inside

    x1 xperia successfully change language from chinesse to english ...guide inside



    problem with Chinese language? yes we made this solution for you just follow under

    Steps




    cable used: usb cable
    solution:

    Step 1 (Preparations)

    - Download and install .NET Framework 3.5 SP1
    - If you are using Vista, install the Mobile Device Center 6.1
    - Set up the Active Sync (active sync 4.5 for XP) / Mobile Device Center (Vista) connection with your X1
    - Charge the battery to at least 50% or more
    - (Re)Connect the X1
    - Run X1_HardSPL.exe
    - Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
    - If asked, press "Yes" on the X1
    - Now a 4-color screen should show up, showing some version Info
    - After that, a progress bar screen will be shown and the phone will reboot when finished
    - Click "Finish" on the PC
    - If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
    KOVS110
    SPL-0.72.OliNex
    MicroP1-787
    MicroP2-707
    - Remove and reinsert the battery to exit bootloader mode


    Step 2 (Flashing ROMs)

    downl
    oad this first(english rom without debranding):

    software for flashing ROMs (HardSPL & NBHUtil)

    Before you start you have to -obviously- download and extract the ROM you want to flash. The file should be named *.image or *.nbh. Before you follow the steps, rename that file to Kovsimg.nbh.

    - Format a MicroSD card with FAT32 if not yet done
    - Copy the Kovsimg.nbh into the root directory of your MicroSD card and insert the card in your phone
    - Turn off the phone (USB cable not attached)
    - Remove and reinsert the battery
    - Hold the volume down button and turn the device on again, still holding both buttons until the 4-color screen shows up.
    - Follow the onscreen instructions

    Congratulations. You're done.

    screen shot:







    Enjoy

  2. #2
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default















  3. #3
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default









Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 01-10-2012, 02:40 PM
  2. Replies: 0
    Last Post: 05-12-2011, 11:09 PM
  3. need to change language
    By jugnu1 in forum BB5 Flash Files
    Replies: 1
    Last Post: 31-01-2008, 07:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •