GFIVE N12 SPD 6610/20 4MB Flash File
Code:
Chip=SpreadTrum
Action=ReadFlash
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=G'FIVE N12 Spd
Comport=COM2
Baudrate=921600
CPU_Type=SC6610/20
CPU_ID=66100000
NOR_ID=00C8004000160000
NOR_Size=4MB
NOR_Name=SF_GD25Q32
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_5.6.1.1
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM92
Connected...sending boot...
FDL test...OK
SC66x0 Unsupport OmnipotentMode in this time.
ArmBootMode: 6610000000FE5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
G'FIVE N12 Spd
All Done.
DOWNLOAD FLASHFILE
YXTEL C910 MTK 625A 16 MB Flash File
Download HERE
Code:
Chip=MTK
Action=ReadFlash
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=yxtel c910
Comport=COM2
Baudrate=921600
CPU_Type=MT625A
CPU_ID=00000000
NOR_ID=00C8006000180000
NOR_Size=16MB
NOR_Name=Unknown Flash
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A
Initializing...
DA_LIB_VER_5.6.1.1
Auto searching the MTK USB Device......
Tip: hold on boot keys on phone keypad and then plug in usb cable,
Rrepeat this process until the commzero show done if not successful.
Done. Comport=COM38
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:625A, HardwareVer:8000, SoftwareVer:CA01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Loading boot...
Boot3 test completed.
Nor Flash ID: 00C8006000180000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Changing baudrate to 921600...
Done.
Reading full Flash...
Saved file to:
yxtel c910
All Done.