Avator Box Readed Flash Files Here

[paramuchml]

Chip=SpreadTrum
Action=ReadFlash
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=G'FIVE N12 Spd
Comport=COM2
Baudrate=921600

CPU_Type=SC6610/20
CPU_ID=66100000
NOR_ID=00C8004000160000
NOR_Size=4MB
NOR_Name=SF_GD25Q32
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

 Initializing...
 DA_LIB_VER_5.6.1.1
 Auto reset and search the USB-to-Serial...
 Connecting...
 Spd USB-to-Serial=COM92
 Connected...sending boot...
 FDL test...OK
 SC66x0 Unsupport OmnipotentMode in this time.
 ArmBootMode: 6610000000FE5A00_00
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 is ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6610/20      Flash: SF_GD25Q32
 setting the Flash Parameters...
 Settings have been completed!
 setting the Serial Flash Parameters...
 Settings have been completed!
 Reading Flash...
 Saved file to:
 G'FIVE N12 Spd
 All Done.

DOWNLOAD FLASHFILE

[paramuchml]

Download HERE

 Chip=MTK
Action=ReadFlash
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=USB
FlashFile=yxtel c910
Comport=COM2
Baudrate=921600

CPU_Type=MT625A
CPU_ID=00000000
NOR_ID=00C8006000180000
NOR_Size=16MB
NOR_Name=Unknown Flash
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

 Initializing...
 DA_LIB_VER_5.6.1.1
 Auto searching the MTK USB Device......
 Tip: hold on boot keys on phone keypad and then plug in usb cable,
 Rrepeat this process until the commzero show done if not successful.
 Done. Comport=COM38
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:625A,    HardwareVer:8000,    SoftwareVer:CA01
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Loading boot...
 Boot3 test completed.
 Nor Flash ID: 00C8006000180000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Changing baudrate to 921600...
 Done.
 Reading full Flash...
 Saved file to:
 yxtel c910
 All Done.