model:
nokia 206

status:
vibrate/blackscreen

solution:
flashing via free soft with modified usb cable

eto po pakisundan na lang
*open bb5 best

*input proper firmware

*hit flash

* insert the usb cable after a few seconds insert the battery..
repeat the procedures hanggang madetect..
install driver manualy if needed..
)






after flashing eto na lumabas.,test mode means ok na ang unit

Code:
card found: A1B5CCE8
registered to: marin

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__03.59.mcusw
PPM : rm872__03.59.ppm_mh1
CNT : rm872__03.59.image_mh1_059Q245
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__03.59.mcusw
PPM : rm872__03.59.ppm_mh1
CNT : rm872__03.59.image_mh1_059Q245
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__03.59.mcusw
PPM : rm872__03.59.ppm_mh1
CNT : rm872__03.59.image_mh1_059Q245
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

->  Phone not found.. :(
->  Boot fail...
    Flashing failed...

->  Phone not found.. :(
->  Boot fail...
    Flashing failed...

->  Phone not found.. :(
->  Boot fail...
    Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__03.59.mcusw
PPM : rm872__03.59.ppm_mh1
CNT : rm872__03.59.image_mh1_059Q245
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 355944052694080
IMEI 2 : 355944052694098
PCcode : ŠC§7±e

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Program Files\Infinity Best By Sanjeev Chauhan\Backup\Cert\355944052694080_355944052694098_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm872__03.59.mcusw
Image : rm872__03.59.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:05 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:01:55 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip

   ===Flashing [PPM]===
File : rm872__03.59.ppm_mh1
Image : package_mh1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ... 
Erase done, time : 00:00:26 
Write , Start : 0x41A80000 , Len : 0x004FE7FC
Flashing , wait ...
Region flash done, time : 00:00:06

   ===Flashing [CNT]===
File : rm872__03.59.image_mh1_059Q245
Image : package_mh1_059Q245.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ... 
Erase done, time : 00:03:22 
Write , Start : 0x42100000 , Len : 0x00FE0000
Flashing , wait ...
Region flash done, time : 00:00:24
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:05 
No write data, skip

Flashing done!
Total flash time : 00:07:04
Reboot phone now...

Reading Phone Info....
Connected phone -   206
Software Info:     V 03.59 24-12-12 RM-872 (c) Nokia            
IMEI:  355944052694080
PPM version :   V 03.59 24-12-12 RM-872 (c) Nokia             MH1
Product code:  059Q8D9
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:10:40
Connect phone on selected interface...
tanggal na hinang at testing sa battery