For Security Test failed
Just
Tick rf bb press pmm auth and write pm 1 to 309.
- do not load any pm
- mark : load rff bb from server
- do PMM Auth
- click write after auth is successful.
For Security Test failed
Just
Tick rf bb press pmm auth and write pm 1 to 309.
- do not load any pm
- mark : load rff bb from server
- do PMM Auth
- click write after auth is successful.
Read & folow
Important-Backup RPL&PM
1. super sd auth or pmm auth __than write good or modified pm ( must need pm 1 & 309)
or, 2. sd repair ___ super sd auth or pmm auth ____ than write good or modified pm ( must need pm 1 & 309)
when we not success by up system
than what can we do for repair security test failed?
Then
1. first backup rpl ( go > imei and security tab > imei rebuild > backup rpl)
2. erase old pm ( go > pm tab > erase )
3. Reset npc data ( go> imei and security tab> reset NPC data)( must backup rpl before do this)
4. Erase pm again (go > pm tab > erase )
5.Write rpl from backup ( go > imei and security tab > imei rebuild > restore imei)
6. go pm tab > super sd auth or pmm auth > than write good or modified pm ( must need pm 1 & 309)
7. erase pm again
8. Recover CERT ( go>imei and security tab> imei rebuild > recover cert)
9. give full factory reset
your phone must come back from security test failed
it is 100% tasted by me.
Use this u can solve problem.
Best of luck.
Quote:
Originally Posted by MANA_SOM
Quote:
trikul post is use full thanx alot to u good work
Quote:
You are right. Thank you very much.
Quote:
Thank you Tarikul. Your solution are tested.
For thanks just press Thanks button
Don't make spam.
No need reply.
Press only Thanks button.
after doing all setings this log is same
Phone Type: RM-237 (Nokia 3110c)
SW Version: V 07.30 07-05-09 RM-237 (c) Nokia.
Imei plain: 35193903375917-0
Battery voltage: 4757 mV, current: 62 mA
Language Pack:
- not available.
SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 351939033759170
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10
CONFIG_DATA: FFFFFFFFFFFFFFFF
PROFILE_BITS: FFFFFFFFFFFFFFFF
BLOCK1: 1=CLOSED(MCCMNC), DATA=00101Fhow to do this job
Quote:
Originally Posted by saijagannath
Just do Sp lock Update
thanks sir good solution
bro i have nokia 2700c dcc data curupted how can i solve this plz
Follow This :Quote:
Originally Posted by Shazz
Attachment 29611
and Write DCC File Offline or Online...
bro plz can u give me dcc file thnx in advance
Click on "Load DCC From Server" to Write DCC OnlineQuote:
Originally Posted by Shazz
or
Click on "Upload" to Write DCC Offline...
Attachment 29613
brother upload option is not highlighted
Click on "Scan" to Connect Phone...Quote:
Originally Posted by Shazz
bro how can i fix n73 security test failed.....
Check First Post of This Thread...Quote:
Originally Posted by jOmz
ok bro..i got it..thanks a lot,very useful thread.
Nice Info
Keep You Work
hello brothers i have a 5five 5130c mobiles contactservice problem how to solve it urgent
Please Search Before PostQuote:
Originally Posted by vijaikumar86
http://www.gsmindia.in/forum/mxkey-n...t-service.html
http://www.gsmindia.in/forum/mxkey-n...t-service.html
http://www.gsmindia.in/forum/mxkey-n...tion-need.html
can any body help me start up failed in n73
Quote:
Originally Posted by azmath
post u r log master...................
REGARDS
STARMOBI@
SERVICE TEAMhttp://i1255.photobucket.com/albums/...i18/online.gif
sir, help me nokia 5800 security test faild on mx-key
Quote:
Originally Posted by jituiti2010
Follow Thread instruction,you can do it.
With mxkey press Super SD Auth
Then write good pm.
If you not have pm then post here set's RM.
imei plain 12345
solution
Quote:
Originally Posted by fayiq
Use RPL Backup or Buy RPL...
