BB5 6630,6680,6681,n70,etc... SP free UNLOCKER!!!
BB5 6630,6680,6681,n70,etc... SP free UNLOCKER!!!
Logger works for BB5 with rap3g v2.11 to v2.20.
Calculator works for any BB5 phone, but....
And don't forget that best things comes from SERBIA.
Special thanks goest to Nokia and Texas Instruments.
User Manual In English !!!!!!!!!!!!
******* CONECTION ******
For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to COM9.
First unpack zip fiole and strat install.bat
In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!
******* USING ********
Program can be started successfully only if is COM port in file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.
READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).
IMPORTANT DO NOT delete or modify that file because can save your *** if something goes wrong.
WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.
MAKE LOG:
***********
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.
SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.
SP UNLOCK PROCEDURE
Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.
That is all folks
If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function
big thanks Dejan Kaljevic
simple procedures for newbies using JAF BOX
Unlocking using JAF COM emulator :
run JAF com emulator
now select comport using same at the device manager
http://www.nlogomaster.com/image/snap038.jpg
click activate comport
http://www.nlogomaster.com/image/snap039.jpg
then run software
you can see this while BB5 logger is running :
http://www.nlogomaster.com/image/snap036.jpg
Unlock Procedures :
click read phone :
http://www.nlogomaster.com/image/snap029.jpg
click make log
http://www.nlogomaster.com/image/snap030.jpg
if you click SPUnlock, this will show
http://www.nlogomaster.com/image/snap031.jpg
solution :
go to this image and clickBB5 calc
http://www.nlogomaster.com/image/snap032.jpg
this must SHOW
http://www.nlogomaster.com/image/snap033.jpg
then go back to bb5 logger and click SPUnlock
http://www.nlogomaster.com/image/snap034.jpg
then smile if you see this
http://www.nlogomaster.com/image/snap035.jpg
I hope this procedures helps a lot.
br
nlogomaster
www.gsm-traders.com
Distributor of JAF BOX
