N8 flashing error

[END2DAY]

mt

Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&201ab723&1&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[131.38 MB]...ERROR RESPONSE WHILE FLASHING

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000

mxkey

Error while programming [00] at 0x00000000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: 82 10 6D 00

phonix

Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 15040 bytes
Secondary boot loaded
Loading update server code: 703665 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Starting to recover the phone
Recoverying phone
Initializing
Erasing complete
Asic CMT: Start programming 229805 KB...
Asic CMT: Programming data sent: 0%
FUR: ALGO reported error in Control Frame. Unable to continue.
FUR: ALGO reported error in Control Frame. Unable to continue.
FUR: ALGO reported error in Control Frame. Unable to continue.
FUR: ALGO reported error in Control Frame. Unable to continue.
FUR: ALGO reported error in Control Frame. Unable to continue.
FUR: ALGO reported error in Control Frame. Unable to continue.
Error sending programming command 0x8401F11F
Error while programming CMT!
ERROR Flashing Algo!. 0x84012283
Unable to flash phone 0x84012283

[END2DAY]

MXKEY Serial: [FT SCR2000 0] - C0810CAB
Using device: AdvanceBox Turbo Flasher
Driver: ehci:hub:ccgp:FTDIBUS, ver: 2.6.0.0 , NTMP ver: 2.6.2.0
Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1]
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 06200215A6A403443B1E1748B6C3D258CA4366D1
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0050 - 0000 0031 [Samsung ] type: FLASH,MuxOneNAND, asic:CMT
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 9.50.0 revision: 3.0 size: 0x7F29B
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS is blank/erased.
Original Imei: 00000000000000
Original Product code:

[jamesjerss]

N-8 Rm-596 USB Flash done in 39 sec by hwk

insert USB Cable to Switched OFF Phone and Power ON
USB BOOT : 60,07 [Rm-596] [2.2.0.1]
CMT ASICID: 000000030000022600010007600C192102031104
EM 1 ID : 00000C35
EM 2 ID : 00000C30
CMT PUBID : 1BA000156FD4034448C850B59B87707A6B3006B8
CMT MODE : 00
CMT HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROMID : E693EF0DAC22615B
CMT 2ND Bt: RAPUv11_2nd.fg, Ver: 11.16.0
CMT 2ND Bt: SILO OK
CMT RMID0 : 00000000-00000000
CMT MCID0 : FFFF0000-00000000
CMT FLID0 : 00EC0050-00000031, Sam OneNAND-4G
CMT RQALG : XSR 1.6
CMT 2ND Boot OK
CMT ALGO : RAPUv11_XSR17_alg.fg, Ver: 11.16.0
CMT KSIG0 : D172C32473AE199B213465ABB3853246F9631231
CMT ALG Boot OK
IMAGE : RM-596_014.002_79.92_prd.core.fpsx
CMT NAND Erase Area: 0x00040000-0007FFFF
CMT NAND Erase Area: 0x000C0000-008BFFFF
CMT NAND Erase Area: 0x00DC0000-0E97FFFF
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:01
Written: 14 Certificate(s)
CMT FLASH WRITE OK, Time: 00:23
IMAGE : RM-596_014.002_U08.01_79.92_prd.uda.fpsx
CMT NAND Erase Area: 0x0EA00000-1EFFFFFF
CNT FLASH ERASE OK, Time: 00:01
CNT FLASH WRITE OK, Time: 00:08
IMAGE : RM-596_014.002_13.01_MEA_A_79.92_prd.rofs2.fpsx
CMT NAND Erase Area: 0x09F40000-0DA7FFFF
PPM FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
PPM FLASH WRITE OK, Time: 00:06
IMAGE : RM-596_014.002_C04.01_MEA_1_79.92_prd.rofs3.fpsx
CMT NAND Erase Area: 0x0DA80000-0E97FFFF
CUS FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
CUS FLASH WRITE OK, Time: 00:00
Flashing Completed, Rebooting Mobile


even i got sme error lik yu on ATF,MXKEY,UFS

bro download the firmware by nokia data package lite ...not oly firmware download vit content files nd try to flash..may b it vil help.