Nokia Asha 200 Contact Service Done by Infinity Box_FREE_BEST_v1.51

[fertxter]

Nokia Asha 200 Contact Service Done by Infinity Box_FREE_BEST_v1.51



Status



Tools

Fertxter Infinity Box_FREE_BEST_v1.51

Firmware RM-761



Logs

card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm761__11.81.mcusw
PPM : rm761__11.81.ppm_ma3
PPM2 : rm761__11.81.ppm_ma3
CNT : rm761__11.81.image_ma3_059J5P7
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 352415057151288
IMEI 2 : 352415057151296
PCcode : 059J4L2

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Users\Fertxter\Downloads\InfinityBox_FREE_BEST_v1.51\Backup\Cert\352415057151288_352415057151296_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm761__11.81.mcusw
Image : rm761__11.81.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:02:00 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:01 
No write data, skip

   ===Flashing [PPM]===
File : rm761__11.81.ppm_ma3
Image : package_ma3.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00740000
Erasing, wait ... 
Erase done, time : 00:00:30 
Write , Start : 0x41A80000 , Len : 0x005105C8
Flashing , wait ...
Region flash done, time : 00:00:05

   ===Flashing [CNT]===
File : rm761__11.81.image_ma3_059J5P7
Image : package_ma3_059J5P7.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ... 
Erase done, time : 00:03:02 
Write , Start : 0x421C0000 , Len : 0x00F80000
Flashing , wait ...
Region flash done, time : 00:00:19
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:04 
No write data, skip

Flashing done!
Total flash time : 00:06:43
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 200
Software Info:     V 11.81 20-08-12 RM-761 (c) Nokia            
IMEI:  352415057151288
PPM version :   V 11.81 20-08-12 RM-761 (c) Nokia             MA3
Product code:  059J4L2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 43 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:07:31
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

My Finish Product




Fertxter

[moley]

grato muito bom me ajudou bastante

[starmobi]

grato muito bom me ajudou bastante

grateful very good helped me a lot

next post in English boss.....

follow the rules...

Enjoy!!!

[zennyzenn]

Does it work perfectly sir?

[imcool12589]

nokia asha 200 phone is not conecting and boot fail error. what should i do..
i tried all three things connected charger, replaced battery several time, my usb cable is also fine and usb drivers are already installed am i missing some thing?

[starmobi]

nokia asha 200 phone is not conecting and boot fail error. what should i do..
i tried all three things connected charger, replaced battery several time, my usb cable is also fine and usb drivers are already installed am i missing some thing?

post your screenshot........

[sdtelecom]

nokia asha 200 phone is not conecting and boot fail error. what should i do..
am i missing some thing?

If you use HWK try this proses

You can do this by selecting nokia C2-05.1 (rm-725) from dct4 tab as model. Just choose nokia 200 files: mcu, ppm and cnt and choose USB interface.
Insert cable to phone without battery and click on flash. Now after you see the message : "insert cable to switched-off phone and power on", insert battery, and flashing should start automatically. However if it doesn't start by itself you can press the power button lightly and it would initiate the flash programming.

[rio_wp]

how to flashing lumia 720 with best crack

[coolfm23]

please how can i repair nokia 200 rm 761 currepted imei..thanks

[bubamarasr]

i have NOKIA ASHA 201 and something went wrong.... my battery went down and when i recharged i started the phone and it's shows CONTACT SERVICE (black letters on a white background) and i can not do anything... help please....