Nokia Asha 200 Contact Service Done by Infinity Box_FREE_BEST

Nokia Asha 200 Contact Service Done by Infinity Box_FREE_BEST_v1.51

Nokia Asha 200 Contact Service Done by Infinity Box_FREE_BEST_v1.51

http://i871.photobucket.com/albums/a...asha-200_5.jpg

Status

http://i871.photobucket.com/albums/a...129_130321.jpg

Tools

Fertxter Infinity Box_FREE_BEST_v1.51

Firmware RM-761

http://i871.photobucket.com/albums/a...er/ASHA200.jpg

Logs

Code:

card found: A1B5CCE8 registered to: CycloneBox Connect phone on selected interface... Core : v1.51 , FlashEngine : v1.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm761__11.81.mcusw PPM : rm761__11.81.ppm_ma3 PPM2 : rm761__11.81.ppm_ma3 CNT : rm761__11.81.image_ma3_059J5P7 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... -> If Windows say "Unrecognized device" - just reinsert battery -> If flashing freeze - reinsert cable and try again --- Press phone's power button or insert charger! --- Connection opened successfully DBG : F00A1FB300020303010100FF CPUID : XGOLD 213 2nd boot Ok, 01 2nd ready, AA Sending Algo Algo sent Ok BL : Quantum_Bootloader_10.46_M1S1 Speed accepted, use 6.500.000 FLASHID : 89008289 FLIC conf set, RST set Boot done! Backup enabled, will read all certificates Reading CCC Reading HWC Reading NPC IMEI 1 : 352415057151288 IMEI 2 : 352415057151296 PCcode : 059J4L2 NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : C:\Users\Fertxter\Downloads\InfinityBox_FREE_BEST_v1.51\Backup\Cert\352415057151288_352415057151296_XG213_CRT.rpl ===Flashing [MCU]=== File : rm761__11.81.mcusw Image : rm761__11.81.mcusw_ebl_psi.fls Cert block found, sending.... Cert sent Found 5 region(s) Processing Region 1/5 Erase , Start : 0x40000000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40000000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 2/5 Erase , Start : 0x40040000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40040000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 3/5 Erase , Start : 0x40060000 , Len : 0x00100000 Erasing, wait ... Erase done, time : 00:00:01 Write , Start : 0x40060000 , Len : 0x00100000 Flashing , wait ... Region flash done, time : 00:00:01 Processing Region 4/5 Erase , Start : 0x40280000 , Len : 0x01800000 Erasing, wait ... Erase done, time : 00:02:00 Write , Start : 0x40280000 , Len : 0x01800000 Flashing , wait ... Region flash done, time : 00:00:32 Processing Region 5/5 Erase , Start : 0x43E20000 , Len : 0x00040000 Erasing, wait ... Erase done, time : 00:00:01 No write data, skip ===Flashing [PPM]=== File : rm761__11.81.ppm_ma3 Image : package_ma3.ppm_ebl_psi.fls Cert block found, sending.... Cert sent Found 1 region(s) Processing Region 1/1 Erase , Start : 0x41A80000 , Len : 0x00740000 Erasing, wait ... Erase done, time : 00:00:30 Write , Start : 0x41A80000 , Len : 0x005105C8 Flashing , wait ... Region flash done, time : 00:00:05 ===Flashing [CNT]=== File : rm761__11.81.image_ma3_059J5P7 Image : package_ma3_059J5P7.image.fls Cert block found, sending.... Cert sent Found 2 region(s) Processing Region 1/2 Erase , Start : 0x421C0000 , Len : 0x01C60000 Erasing, wait ... Erase done, time : 00:03:02 Write , Start : 0x421C0000 , Len : 0x00F80000 Flashing , wait ... Region flash done, time : 00:00:19 Processing Region 2/2 Erase , Start : 0x43E60000 , Len : 0x000E0000 Erasing, wait ... Erase done, time : 00:00:04 No write data, skip Flashing done! Total flash time : 00:06:43 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 200 Software Info: V 11.81 20-08-12 RM-761 (c) Nokia IMEI: 352415057151288 PPM version : V 11.81 20-08-12 RM-761 (c) Nokia MA3 Product code: 059J4L2 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 43 certs Data exist, skip certificate repair... Battery voltage is enough for start AfterFlash operations done ;D Done! Connect phone on selected interface... Elapsed: 00:07:31 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface...

My Finish Product

http://i871.photobucket.com/albums/a...129_125526.jpg

Fertxter

grato muito bom me ajudou bastante

Quote:

Originally Posted by moley

grato muito bom me ajudou bastante

Quote:

grateful very good helped me a lot

next post in English boss.....

follow the rules...

Enjoy!!!

Does it work perfectly sir?

nokia asha 200 phone is not conecting and boot fail error. what should i do..
i tried all three things connected charger, replaced battery several time, my usb cable is also fine and usb drivers are already installed am i missing some thing?

Quote:

Originally Posted by imcool12589

nokia asha 200 phone is not conecting and boot fail error. what should i do..
i tried all three things connected charger, replaced battery several time, my usb cable is also fine and usb drivers are already installed am i missing some thing?

post your screenshot........

Quote:

Originally Posted by imcool12589

nokia asha 200 phone is not conecting and boot fail error. what should i do..
am i missing some thing?

If you use HWK try this proses

You can do this by selecting nokia C2-05.1 (rm-725) from dct4 tab as model. Just choose nokia 200 files: mcu, ppm and cnt and choose USB interface.
Insert cable to phone without battery and click on flash. Now after you see the message : "insert cable to switched-off phone and power on", insert battery, and flashing should start automatically. However if it doesn't start by itself you can press the power button lightly and it would initiate the flash programming.

http://img819.imageshack.us/img819/1808/1wk5.jpg

how to flashing lumia 720 with best crack :D

please how can i repair nokia 200 rm 761 currepted imei..thanks

i have NOKIA ASHA 201 and something went wrong.... my battery went down and when i recharged i started the phone and it's shows CONTACT SERVICE (black letters on a white background) and i can not do anything... help please....