Results 1 to 4 of 4

Thread: How to enter my Unlock Code on BlackBerry?

  1. #1
    GsmIndia.in Active Teen mzone's Avatar
    Join Date
    Aug 2007
    Location
    inside of mobile(HABIGANJ)(BD)
    Age
    53
    Posts
    71

    Lightbulb How to enter my Unlock Code on BlackBerry?

    Blackberry 8800 8300 Curve Unlock Code Entry Instructions
    How to Enter Unlock Codes on BlackBerry 8800 8300 Curve:




    ***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****


    1. Go to settings menu => and then Options
    2. Select Advanced options => and then Sim card
    3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from CellUnlock.net and press in the track wheel / jog dial to confirm
    6. Your phone is now unlocked


    ************************************************** *

    Blackberry 8100 Unlock Code Entry Instructions




    How to Enter Unlock Codes on BlackBerry 8100 Pearl:
    Step Action
    1 Insert SIM into device
    2 Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
    3 Select "Options" THEN SELECT ADVANCED OPTIONS
    4 Scroll down and select "SIM Card"
    5 Type "MEPPD" (please note that you will not see what you type on the screen)
    6 Type "MEPP then [ALT BUTTON] then 2" (please note that you will not see what you type on the screen)
    7 Enter the Unlock Code
    8 Press enter
    9 Reboot device. Device is now unlocked.



    *******************************************


    Blackberry 8700 Unlock Code Entry Instructions
    How to Enter Unlock Codes on BlackBerry 8700:
    8700c Unlocking Info




    ***** You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! *****
    go to settings
    go to options
    go to advanced options
    go to sim card
    Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
    Does it say Network active? if so your phone is locked
    Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
    It will say "Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm.
    Your phone is now unlocked



    ************************************************** ******

    BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions
    How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc..




    Select Options menu on BB.
    Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
    Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
    Usually u should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.)
    Here you must enter the "NET Unlock Code" that we gave you.



    Thanks to Muzars
    Last edited by mzone; 18-01-2008 at 01:40 AM.

  2. #2
    GsmIndia.in Active Teen Unlock Trigger's Avatar
    Join Date
    Dec 2008
    Age
    34
    Posts
    190

    Lightbulb How to enter my Unlock Code on BlackBerry?

    Model : BlackBerry 8700


    Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

    Model : BlackBerry 8800

    ***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

    1 - Go to settings menu => and then Options
    2 - Select Advanced options => and then Sim card
    3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
    6 - Your phone is now unlocked

    Model : BlackBerry 8100 Pearl

    1 - Go to Options Menu => Advanced Options
    2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
    3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
    4 - Enter the unlock code.

    ---------

    Model : BlackBerry 8100 (Vodafone Australia)

    PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

    This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

    1. Take note of the unlocking code shown above

    2. Insert a Non-Vodafone Australia working SIM card.

    3. Ensure the phone is charged and then switch the phone on.

    4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

    5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

    6. Select “Turn Wireless Off”

    7. Select “Settings” Menu , then go to Advanced Options > SIM Card

    8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

    9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

    10. Reset the phone by pulling the battery

    11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

    Please Note:

    If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

    To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

    FAQ:

    Question: My phone asks to enter a PIN number

    Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

    Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

    Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

    Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

    Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

    --------------------

    Model : All BlackBerry

    1 - Using the menu go to Settings Menu -> SIM card pressselect.
    2 - While holding the SHIFT key, type mepd
    3 - You should now see the five locking categories listed.
    4 - While holding the SHIFT KEY, type mep2.
    5 - Release the shift key.
    6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
    7 - Enter the code
    8 - Enter Return/Enter
    9 - The device should then be unlocked

    Regards,Trigger

  3. #3
    GsmIndia.in Board Browser
    Join Date
    Mar 2010
    Posts
    1

    Default No more attempts left to enter mep unlock code on blackberry

    Hard locking a blackberry seems to be a more common occurrence. People go online and based on what they find start entering incorrect codes into their blackberry to try to unlock it.

    It is important to follow the step by step instructions, but more important is to have a single correct code. Unlock codes are unique to each handset. Do not enter a code that someone used on their phone.

    Make sure you deal with a reputable unlocker. If for some unfortunate reason you do hard-lock your blackberry, contact and we will try to help you.

    The best way to insure you get the correct unlock code for your blackberry is to read the mep number off your handset. You can do this by downloading the free mep reader software from our site. There are versions for mac and for pc. Providing an mep2 number and a correct imei number will insure quick and accurate delivery of the unlocking code.

    If you are every given an unlock code and it does not work on the first try, STOP, and contact the code providers immediately. Lots of times we think we have a phone from one provider (ie. vodafone) and it might really be coded for another provider (ie. Movistar). Someone might have flashed the phone and changed the firmware.

    Like I said protect yourself and read the mep off your handset.

    We are here to help.

    Unlockology Team
    Last edited by GsmMobile; 19-03-2010 at 06:41 PM.

  4. #4
    GsmIndia.in Board Browser
    Join Date
    Aug 2010
    Age
    48
    Posts
    4

    Default

    Good information.........

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. All in one master code
    By atulharnal in forum Motorola Hardware Repair Section
    Replies: 2
    Last Post: 03-01-2013, 12:59 PM
  2. All in one master code
    By atulharnal in forum Nokia Hardware Repair Section
    Replies: 8
    Last Post: 16-08-2011, 11:21 PM
  3. All in one master code
    By atulharnal in forum Samsung Hardware Repair Section
    Replies: 2
    Last Post: 23-11-2010, 08:03 AM
  4. All in one master code
    By atulharnal in forum Sony Ericssion Hardware Repair Section
    Replies: 10
    Last Post: 08-05-2010, 07:56 PM
  5. k800 reast file urgent
    By smilegsm in forum Sony Ericsson Firmware
    Replies: 6
    Last Post: 21-02-2009, 04:20 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •