Results 1 to 2 of 2

Thread: How To Reload the OS on a Nuked/Bricked BlackBerry

  1. #1
    GsmIndia.in Active Teen Unlock Trigger's Avatar
    Join Date
    Dec 2008
    Age
    34
    Posts
    190

    Lightbulb How To Reload the OS on a Nuked/Bricked BlackBerry

    The Nuked/Bricked BlackBerry Problem

    The fundamental problem with the Nuked Berry scenario is that because the device is stuck in a permanent reboot sequence or loop, when you attach it your computer via USB cable it simply connects and disconnects over and over and over again (you’ll just keep hearing that USB detected/unplugged noise) as the BlackBerry turns on/off. This makes using the BlackBerry Desktop Manager software to reload your OS impossible as the device is only detected for a couple of seconds before the device shuts off (and is now undetected).





    Nuked Berry...just a second before the display shuts off
    and the device reboots itself, again and again and again


    Requirements/Disclaimer

    Before reloading the operating system on a Nuked BlackBerry, you need to make sure you have taken care of some basics:

    * you are using a Windows Computer
    * have BlackBerry Desktop Manager installed
    * have the BlackBerry Operating System you want to install/reload onto your Nuked BlackBerry installed

    You can download the latest version of BlackBerry Desktop Manager (version 4.3) from the BlackBerry.com website, and you can find the latest Operating System available for your device from your Carrier’s website


    How to Reload the Operating System on a Nuked BlackBerry

    Step #1: Make sure your BlackBerry IS NOT connected to your computer. Locate and Open the App Loader application. You won't have a shortcut to this program on your start menu. You need to locate it manually. Open your file browser, go to your C Drive (operating system drive) and navigate your way through the folders to Program Files > Common Files >Research In Motion > AppLoader. Once you are in the AppLoader directory, double click on the Loader application shortcut. Once Loader opens, you can click Next and then proceed to Step #2. As you may have noticed, we skip Desktop Manager altogether.



    Step 1: Browse your way into the AppLoader Directory, and Open the Loader Application




    The Loader Homescreen. You can Click Next to Continue





    After you click next, Loader Waits for you to Connect the Device.
    Proceed to Step #2

    Step #2: We need to connect the BlackBerry to the Computer via USB cable. But here's where the tricky part comes in with the Nuked BlackBerry. Do you see in the image above where it says COM1? What we want to do is plug in the BlackBerry, and when COM1 switches to say USB-PIN:UNKNOWN we immediately click Next. This catches the BlackBerry and takes it out of the constant reboot cycle and allows you to then reload the Operating System.

    Tip: The USB-PIN:UNKNOWN option will display for a few seconds when the BlackBerry is first connected/flashing its LED in red. With a Nuked BlackBerry, That occurs when the device is in the initial start-up part of it's reboot sequence. The easiest way to get that to happen (vs. waiting for that step in the reboot sequence where you have a tenth of a second to hit Next before you lose your chance) is to simply pull the battery from the BlackBerry. With the battery pulled, connect the BlackBerry to the USB connector and as SOON as you see USB-PIN:UNKNOWN hit Next. You have to be quick still, but using this method you are in control of the timing. From there you can put the battery back in and battery cover back on (Make Sure you install the battery or else when the OS update is completing and the device disconnects from the computer to reboot, it will lose the power provided by the USB connection and you will get an error and have to do it all over again!).

    ** If you don't get it right the first time, try again (unplug from USB, pull battery, connect and hit Next while USB-PIN:Unknown is showing). You have to be fast and the timing is key, so it may take you three or four tries.




    Connect Your BlackBerry via USB. Click NEXT as Soon as USB:UNKNOWN Appears



    Tip: With Battery Out, Connect BlackBerry to USB.
    This will give you more control in nailing the timing of
    connecting Next while USB:UNKOWN displays

    Step #3: With your BlackBerry now out of the permanent reboot sequence, you are essentially in the clear and well on your way to having your BlackBerry up and running again. Choose the options you want to install on your BlackBerry (BrickBreaker, BlackBerry Messenger, BlackBerry Maps, etc.), click next, then approve the installation by clicking "Finish." Sit back and relax while the BlackBerry does its thing. It'll take some time and go through a number of screens but eventually you will reach my favorite "The loading operation was successful" screen. Your BlackBerry will reboot itself at this point and it will take a LONG time to reboot (10 - 15 minutes or so). You can unplug it from the USB (it's not connected while rebooting) and just continue to sit back and wait. Get scared, but not too scared...it will eventually boot up





    Select the OS options you want to install




    Approve the Operating System Installalation Options



    Sit back and relax and let the installer do its thing



    Installation Complete! Just sit back and let your BlackBerry Reboot

    Step #4: That's it! You are done. Brand New BlackBerry. With your BlackBerry no longer Nuked, you can run through the Set Up Wizard (set the date/time/fonts, etc.) and from there you WILL NOW BE ABLE TO connect to the BlackBerry Desktop Manager software. Hopefully you occasionally back up your data and can now use Desktop Manager's restore function to load up your backed up data. If not, hopefully you have your contacts all synced to Outlook so you can reload your Address book from there. Once that's done, it's time to install all your favorite apps again!

    Regards,Trigger

  2. #2
    GsmIndia.in Board Browser
    Join Date
    Oct 2010
    Age
    54
    Posts
    1

    Default

    I cannot reconnect to JVM it always fails and asks for password if required. Since screen is blank I am somewhat lost at this stage

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 28-01-2010, 11:08 AM
  2. Bb-box free update : V1.0.2 [19-01-2010]
    By mrizwansh in forum Gsm Updates & News
    Replies: 0
    Last Post: 20-01-2010, 02:08 PM
  3. Bb-box free update : V1.0.2
    By GsmReporter in forum Gsm Updates & News
    Replies: 2
    Last Post: 20-01-2010, 08:15 AM
  4. Replies: 0
    Last Post: 18-07-2009, 05:43 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •