how to use spiderman

dear friends
please help how to use spider man software

Here Only You Can Find How To Use Spider-Man Box

http://www.i-phoneteam.com/matrix/SPider%20man.JPG

1-The Connect button which use for connect box with program

If connection Is Good this button will be Disconnect

2-Select Comport which u can use

3-Select Baundrate For Comport

4-Used For Make Conaction With Phone ((Boot The Phone))

5-Used For Make Order To write selected Flash Files on Nor Flash Or Nand Flash

6-Used For Make Order To Read Flash Files Form Phone And Request for where u want to save backup flash files

7- Used For Make Format Opration and if u check to Manual Format Default this option is required to Make Manual Set For Foramt Area

http://www.i-phoneteam.com/matrix/spider%202.bmp


8-Used For Unlock Phones ((open all network locks ))

9-Used For Find Pinout For Phone and give us Correct Tx And RX Pins
(( We Can choose From 2 Options 1St, 1 Cpu Phones - 2Nd, 2Cpu Phones ))

10- We Can Used This Option to Defind Pinouts and Save Our Correct pinouts Searching

11-This Opation allowed us To Convert Flash Files which Had Bin Extension
To Bif Extension

12-Used For Abort Any Working Opartion

13-Used TO Know Any New Updates In Support Area

14-This Bar allowed us To Change between Phone Cpu which We Have
Like MTK And SPreadtrum .......

15- here We Can Open Nor Flash which we Want To Flah it to phone

16- here we also can choose where we want to save reading flash files

17- Same as last oprations ((15-16)) But Here For Nor Flah Area

18- Used For Rebuild Iemi for Phone

19- Used For Make Full Factory Defaults

20- The Area For Read all Info About SW and Flash File Details

Hope This Info Help U TO Work With This Great Too

Spiderman Read&Flash

connect box to computer .connect phone to box and cable


http://www.i-phoneteam.com/matrix/1.JPG

YOU Must choose MTK CPU.click”Search Phone”.when found cable pinout

http://www.i-phoneteam.com/matrix/2.JPG


1. Read flash
* click”Save” Choose save file folder and save name
* click"Read” after press” power on”button in the phone Bootloader phone

http://www.i-phoneteam.com/matrix/3.JPG

Reading........

http://www.i-phoneteam.com/matrix/4.JPG
http://www.i-phoneteam.com/matrix/5.JPG

2. Flash phone.

* Click”Open” choose flash the phone flash file

* Click”Flash” after press” power on”button in the phone Bootloader phone

http://www.i-phoneteam.com/matrix/6.JPG

http://www.i-phoneteam.com/matrix/7.JPG

NOW Flash complete

thanks a lot sir but some phones doesnt reaad flash shows error whats the solution for those phones

give the logs for the phone and model

i give solution

thanks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

is thr any problem or risk in formating a phone which is not in dead condition