p900 flash successful, but not switch on

[shoeb7]

--------------------------------------------------------------------------------

hi!! to all of you
this is my first flashing.this cell p900 before flashing when s/w on SE logo appear and shut down.

before flashing i charged the batt.

1 attach the cable to mobile with batt inside
2 click on attach button (slide the batt out for 5 sec and again inserted)
3 flash AVR P900_ phone_CXC162022_R3D011.AVR.FLP.....FLASH 100%
4 detach the phone from primary tab
5 removed the battery
5 removed the cable which was attach to mobile.
6 again insert the batt and cable to the mobile
7 in flash option their is flash PDA.I click the pda flash and select this file
P900_Symbain_CXC162021_R3D011.PDA.FLP.....FLASH 100%.
8 again click on flash pda and select this file P900_APAC4_CDA1620038bin_R5A07.PDA.flp.......flash 100%.


after this detach the mobile from primary tab and then removed the cable and battery.but when on the cell only dark blue screen....

please suggest me what to do know,is my flashing procedure was wrong?.

Regards!

[MUNEEB_AKHTAR_RAZA]

Bro u r wrong in ur 7th step....U must have to select P80x/P90x PDA option in primery tab left upper side....So here is the method how to flash it........
1:Attach to phone
2:Flash AVR with AVR file
3eattach the phone
4:Now in primery tab left upper corner under "primery"
Select P80x/P90x PDA option and press attach to phone...
5:Now press Flash Pda and flash symbian part
6:Again press Flash pda and flash the lang file...
7:Flash Bt(if needed....But in most cases no need to do so)
8:Now deattach
9:Now again in primery tab left upper corner select Standerd (dont wait)
10:Attach to phone
11:In security AVR tab press rebuild security zone....
12:After complete al the steps power on ur phone......
If its software problem then set will 100%ok....
Note:If after pressing attach to phone button and it stops on powering on the mobile then pick out and reinsert battery.......And always remember to use full charged battery...ANd if again u have any problem then plz post here!

[shoeb7]

cheif!
every thing was going ok but i stuck on 10 ATTACH THE PHONE
After attach the phone powering on mobile appers on the control screen,and nothing happens.so i agian detach and pressing attach to phone button and it stops on powering on the mobile then pick out and reinsert battery..then followed the rest procedure from 11 to 12

after all this removed both battery and cable,when check with battery same problem dark screen.

kindly tell me is the same flashing procedure for p910i, i had one auto shut down after SE logo.

need ur assist

[MUNEEB_AKHTAR_RAZA]

yes this is the same procedure....And i think u have empty battery plz first charge the battery....

[shoeb7]

this is the same cell when try to attach,.. this is the log
System diagnostics passed.
Version 10.08 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
Trying CID27 applet...
RSA protection feature inactive.
Bypassing authority check...
Time spent entering bootstrap: 33s
Initializing phone hardware...
Terminating bootstrapper thread...
All threads terminated.

Script error: Timeout [10.08.34]

when powering on display in remove the batt and after 3 sec reattach but still the same. i tried standard(dodn't wait) also sme problem.

[shoeb7]

the phone finally get attached from step 1 to 8(step 7 i skipped) all ok,
kindly tell step no 8 deattach means what( like i had to click on deattach or after clicking deattach i had to remove battery and cable as i did)
then when again try to attach with standard dodn't wait option for rebuild security zone....the phone is not responding.. check this.
System diagnostics passed.
Version 10.08 ready!



[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
Trying CID27 applet...
RSA protection feature inactive.
Bypassing authority check...
Time spent entering bootstrap: 19s
Initializing phone hardware...
Terminating bootstrapper thread...
All threads terminated.
Script error: Timeout [10.08.34]


battery is full charged 4.1v.i tried all the baundrate limits.