Phones Tested by the Team

**GsmMobile** · 27-03-2009, 12:37 AM

6030 FBUS

Booting UPP...
UPP ID: 2031 [HW_UPP4M_v3]
rm74__5.400, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020882E @ 0x01000000, ST, SectorSize: 128kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020882E (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 843BF2F04572E6165F9B6B4ABC
MSID-Plain: 8BA1BAE90004DE40A8000000
FAID-Crypted: 624BCB4FF828BE8ACF0ED380
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x017BFFFF]
Erasing NOR Region [0x01F20000-0x01FDFFFF]
Erase taken 77.343s
Writing 435 blocks...
All blocks written OK! Time taken 279.344s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2031 [HW_UPP4M_v3]
rm74__5.40.image_b_128, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020882E @ 0x01000000, ST, SectorSize: 128kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020882E (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 84C6B5ACDFDE87DD7D81407DEB
MSID-Plain: 1C15BAE30004DE40AD0005BD
FAID-Crypted: CEE38148A187FDD48B26A17A
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C00000-0x01F1FFFF]
Erase taken 27.906s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 48 blocks...
All blocks written OK! Time taken 28.218s
Terminating flash session
Extracting Content Package...
CP Server: (c) Nokia File Server
Content Package Extracted OK
Box VPP disabled
Booting UPP...
UPP ID: 2031 [HW_UPP4M_v3]
rm74__5.40b, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020882E @ 0x01000000, ST, SectorSize: 128kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020882E (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,00V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 844C52BA9CFC2A4C5311A0B3D1
MSID-Plain: 3E4EBAE90004DE40A8000000
FAID-Crypted: FBAE8FD3BCA501B5F99641D4
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x017C0000-0x01BFFFFF]
Erase taken 39.16s
Writing 80 blocks...
All blocks written OK! Time taken 47.719s
Terminating flash session

**GsmMobile** · 27-03-2009, 12:39 AM

1112 FBUS

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_06.460, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 8492EFDCE45BD5CF05E58F7178
MSID-Plain: 3E4EBAE900442192AA000000
FAID-Crypted: 5C724B63DB8BEA5B0DEEB508
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Out of flash bounds, Skipping
Out of flash bounds, Skipping
Erase taken 38.125s
Writing 122 blocks...
All blocks written OK! Time taken 16.609s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh930_nai6.46ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 8492EFDCE45BD5CF05E58F7178
MSID-Plain: 3E4EBAE900442192AA000000
FAID-Crypted: 5C724B63DB8BEA5B0DEEB508
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 2.453s
Writing 11 blocks...
All blocks written OK! Time taken 1.422s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_06.46ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898872 @ 0x01000000, Intel, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898872 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 84D511B766A9BFB39E8E706748
MSID-Plain: 3E4EBAE900442192A9000000
FAID-Crypted: 0DD4EB2DF71020486C2FF4B3
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 15.531s
Writing 91 blocks...
All blocks written OK! Time taken 12.547s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:39 AM

2310 FBUS

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm189_06.520, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00208828 @ 0x01000000, ST, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_st_i.fia, Type: Algorithm, Target: FlashChip[0] 0x00208828 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 845BBB4F4819DDF77924291DA0
MSID-Plain: 3E4EBAE900071A6CAA000000
FAID-Crypted: AEA6D05497E3F217270C815A
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Out of flash bounds, Skipping
Out of flash bounds, Skipping
Erase taken 38.578s
Writing 123 blocks...
All blocks written OK! Time taken 12.188s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm1890_nai6.52ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00208828 @ 0x01000000, ST, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_st_i.fia, Type: Algorithm, Target: FlashChip[0] 0x00208828 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 845BBB4F4819DDF77924291DA0
MSID-Plain: 3E4EBAE900071A6CAA000000
FAID-Crypted: AEA6D05497E3F217270C815A
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 2.438s
Writing 12 blocks...
All blocks written OK! Time taken 1.187s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rm189_06.52ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00208828 @ 0x01000000, ST, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_st_i.fia, Type: Algorithm, Target: FlashChip[0] 0x00208828 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
No correct VPP supplied, programming speed not increased (low speed flash chip)
MSID-Crypted: 845BBB4F4819DDF77924291DA0
MSID-Plain: 3E4EBAE900071A6CAA000000
FAID-Crypted: AEA6D05497E3F217270C815A
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 15.860s
Writing 91 blocks...
All blocks written OK! Time taken 9.32s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:40 AM

1600 FBUS

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_07.020, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 84417A94E8720D156910AD1623
MSID-Plain: 3E4EBAE90015EA27A9000000
FAID-Crypted: 46CB7EC493099DB3FD251624
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Out of flash bounds, Skipping
Out of flash bounds, Skipping
Erase taken 31.31s
Writing 119 blocks...
All blocks written OK! Time taken 9.157s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh640_nai7.02ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 848659F70A6541A62AA7267B99
MSID-Plain: 3E4EBAE90015EA27AA000000
FAID-Crypted: 668E50D559A7DFA1A44DCCD5
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.984s
Writing 9 blocks...
All blocks written OK! Time taken 0.672s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_07.02ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 84417A94E8720D156910AD1623
MSID-Plain: 3E4EBAE90015EA27A9000000
FAID-Crypted: 46CB7EC493099DB3FD251624
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011D0000-0x011DFFFF]
Erasing NOR Region [0x011E0000-0x0137FFFF]
Erase taken 13.343s
Writing 101 blocks...
All blocks written OK! Time taken 7.875s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:41 AM

6070 without VPP

Booting UPP...
UPP ID: 2142 [HW_UPP8M_v4_2]
rm166__04.230, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 84E160EE9ACA0A1B40D5A972B5
MSID-Plain: 8A0CBAE900816F8EA9000000
FAID-Crypted: 871E7CEA2DB0AC6E869B3E8A
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x018DFFFF]
Erasing NOR Region [0x01E60000-0x01FDFFFF]
Erase taken 71.437s
Writing 559 blocks...
All blocks written OK! Time taken 46.94s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2142 [HW_UPP8M_v4_2]
rm166__04.23.image_b, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,00V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 84E444C8C5945B31916865AAAC
MSID-Plain: 1C15BAE300816F8EAD0005BD
FAID-Crypted: 117B591879CB69AF333C50AA
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01B20000-0x01E5FFFF]
Erase taken 21.985s
File Sector Size: 64kB, Flash Chip Sector Size: 64kB
CNT Convertion not needed
Writing 84 blocks...
All blocks written OK! Time taken 6.953s
Terminating flash session
Extracting Content Package...
CP Server: (c) Nokia File Server
Content Package Extracted OK
Box VPP disabled
Booting UPP...
UPP ID: 2142 [HW_UPP8M_v4_2]
rm166__04.23b, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 84B902AFA8777BA33DFAF5FBED
MSID-Plain: 3E4EBAE900816F8EA8000000
FAID-Crypted: 92001623A48C051D1466BCA9
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x018E0000-0x01B1FFFF]
Erase taken 16.219s
Writing 104 blocks...
All blocks written OK! Time taken 9.78s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:41 AM

5000d FBUS

Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__04.89.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
MSID-Crypted: 849EBCA83EE975ABE9732D6B1A
MSID-Plain: 2C40BAE9009158EEA9000000
FAID-Crypted: 585792655E9901E2F59344DA
Flashbus Write baud set to 200Kbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01BFFFFF]
Erase taken 49.391s
Writing 190 blocks...
All blocks written OK! Time taken 683.844s
Terminating flash session
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__04.89.image_ea_gre, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
MSID-Crypted: 84CB80582A0306DBCB17016AFA
MSID-Plain: D26EBAF1009158EEAA000610
FAID-Crypted: 983D40D07C827148008917B6
Flashbus Write baud set to 200Kbits
2 Region(s) to erase
Erasing NOR Region [0x02180000-0x02E7FFFF]
Erasing NOR Region [0x02E80000-0x02FBFFFF]
Erase taken 57.703s
Writing 344 blocks...
All blocks written OK! Time taken 313.922s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__04.89.ppm_ea, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
MSID-Crypted: 84CE6638A3280CCCBA3A8D4B71
MSID-Plain: 3E4EBAE9009158EEAA000000
FAID-Crypted: 55EE8EB4D6F07C9F3D40559E
Flashbus Write baud set to 200Kbits
1 Region(s) to erase
Erasing NOR Region [0x01C00000-0x0217FFFF]
Erase taken 22.125s
Writing 64 blocks...
All blocks written OK! Time taken 229.860s
Terminating flash session

**GsmMobile** · 27-03-2009, 12:42 AM

6310i FBUS + BT

Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
npl110_7.000, Type: Flash Image, Algo: DCT4, DCT4 & BT ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
External Box VPP Enabled
PLL Factor: 1
FlashChip[0]: 0x0001267E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00020110
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd_b.fia, Type: Algorithm, Target: FlashChip[0] 0x0001267E (64Mbits), Rev: 7.4.76.0, Algo: DCT4 & BT ALGORITHM
Nominal VPP Voltage: 9V, Detected: 8,28V
Correct VPP Detected, increasing programming speed
MSID-Crypted: 8419763D1D5721605EE9E5C3EB
MSID-Plain: DC74BAE90044E48AA8000000
FAID-Crypted: 47E5A4B7686A393ED4C3A63D
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x015CFFFF]
Erasing NOR Region [0x016B0000-0x017EFFFF]
Erase taken 64.734s
Writing 396 blocks...
Phone BT MCM HW Revision: 22
BT Image HW Revision: 1211
Skipping current BT Image
BT Image HW Revision: 22
BT Image matches Phone BT MCM HW Revision
Sending BT Configuration...
Flashing BT...
Registering BT...
BT Flashing Completed
All blocks written OK! Time taken 46.687s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
npl110_7.00b, Type: Flash Image, Algo: DCT4, DCT4 & BT ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
External Box VPP Enabled
PLL Factor: 1
FlashChip[0]: 0x0001267E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00020110
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd_b.fia, Type: Algorithm, Target: FlashChip[0] 0x0001267E (64Mbits), Rev: 7.4.76.0, Algo: DCT4 & BT ALGORITHM
Nominal VPP Voltage: 9V, Detected: 8,28V
Correct VPP Detected, increasing programming speed
MSID-Crypted: 8419763D1D5721605EE9E5C3EB
MSID-Plain: DC74BAE90044E48AA8000000
FAID-Crypted: 47E5A4B7686A393ED4C3A63D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x015D0000-0x016AFFFF]
Erase taken 7.984s
Writing 47 blocks...
All blocks written OK! Time taken 3.907s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:42 AM

Good old 3510i

Without VPP

Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rh9__05.350, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1,52V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 844F0F0366ED5751E7B90ECD71
MSID-Plain: D3EBBAE900DC6357A9000000
FAID-Crypted: 4A1F1FBBD0B4F613E943ED53
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x017EFFFF]
Erase taken 64.672s
Writing 331 blocks...
All blocks written OK! Time taken 37.782s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
cp_pb_05.350, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1,52V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 847CF3EB00B424A72E10A79741
MSID-Plain: 3E4EBAE900DC6357AA000000
FAID-Crypted: 0AB0A584F6C5573E78ACF31A
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01580000-0x0168FFFF]
Erase taken 8.875s
Writing 12 blocks...
All blocks written OK! Time taken 1.312s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rh9__05.35b, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 1,48V
No correct VPP supplied, but programming speed twiced (high speed flash chip)
MSID-Crypted: 8456B27AD7F05F6FB2CD09E518
MSID-Plain: 3E4EBAE900DC6357A9000000
FAID-Crypted: 4B7F4EAA5D1E77430241EB75
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01580000-0x0168FFFF]
Erase taken 8.750s
Writing 56 blocks...
All blocks written OK! Time taken 6.406s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:43 AM

Good old 3510i

with VPP

Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rh9__05.350, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
External Box VPP Enabled
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 8,33V
Correct VPP Detected, increasing programming speed
MSID-Crypted: 844F0F0366ED5751E7B90ECD71
MSID-Plain: D3EBBAE900DC6357A9000000
FAID-Crypted: 4A1F1FBBD0B4F613E943ED53
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x017EFFFF]
Erase taken 49.828s
Writing 331 blocks...
All blocks written OK! Time taken 28.531s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
cp_pb_05.350, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
External Box VPP Enabled
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 8,33V
Correct VPP Detected, increasing programming speed
MSID-Crypted: 847CF3EB00B424A72E10A79741
MSID-Plain: 3E4EBAE900DC6357AA000000
FAID-Crypted: 0AB0A584F6C5573E78ACF31A
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01580000-0x0168FFFF]
Erase taken 7.47s
Writing 12 blocks...
All blocks written OK! Time taken 1.0s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rh9__05.35b, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
External Box VPP Enabled
PLL Factor: 1
FlashChip[0]: 0x00EC22F2 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 000000E0
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F2 (64Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 8,33V
Correct VPP Detected, increasing programming speed
MSID-Crypted: 8456B27AD7F05F6FB2CD09E518
MSID-Plain: 3E4EBAE900DC6357A9000000
FAID-Crypted: 4B7F4EAA5D1E77430241EB75
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01580000-0x0168FFFF]
Erase taken 7.16s
Writing 56 blocks...
All blocks written OK! Time taken 4.844s
Terminating flash session
Box VPP disabled

**GsmMobile** · 27-03-2009, 12:43 AM

6650d FBUS

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm400_03.31_prd_core.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21B001153CAC0158D0EBE5306CD9B54394F5F1CD
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
rm400_03.31_prd_core.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC003000400221, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E3B2ECDF54959A4084B1A345E5BDA91749FFFB40
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x0087FFFF, ONENAND
EraseArea[0,CMT]: 0x00B80000-0x05A7FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.938s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 101.922s
Restarting MCU...
Processing rm400_03.31_prd_core.fpsx (APE)...
Processing rm400_03.31_prd_v06PL_01_euro3pl.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21B001153CAC0158D0EBE5306CD9B54394F5F1CD
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
rm400_03.31_prd_v06PL_01_euro3pl.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC003000400221, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E3B2ECDF54959A4084B1A345E5BDA91749FFFB40
Started group flash erase
EraseArea[0,CMT]: 0x0423B000-0x057EFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.235s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 33.938s
Restarting MCU...
Processing rm400_03.31_prd_v06PL_01_euro3pl.fpsx (APE)...
Processing rm400_03.31_prd_vTMPL_01_TMPL.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 21B001153CAC0158D0EBE5306CD9B54394F5F1CD
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
rm400_03.31_prd_vTMPL_01_TMPL.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC003000400221, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E3B2ECDF54959A4084B1A345E5BDA91749FFFB40
Started group flash erase
EraseArea[0,CMT]: 0x057F0000-0x05A7FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.32s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 4.188s
Restarting MCU...
Processing rm400_03.31_prd_vTMPL_01_TMPL.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 08w11.18
MCU Date 24-11-08
Product RM-400
Manufacturer (c) Nokia
IMEI 353103021667329
IMEI Spare 3A35010312663702
IMEI SV 3335010312663742F3000000
PSN REK575630
Product Code 0562222
Module Code 0203716
Basic Product Code 0556857
PSD 0000000000000000
LPSN 0
Camera 352327686
APE SW 03.31
APE Variant 06.0103.31.TMPL.01
APE Test rm400_ENO_x_03.04v0.050
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 5005
RFIC 17141715
DSP MPD_pb71_08w19.00_rm324
Simlock Server SIMLOCK SERVER
Simlock Key 2620200000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

**GsmMobile** · 27-03-2009, 12:44 AM

Many more success results will be posted here especially Bb5 USB alive/dead logs.

**Eng_imran2009** · 27-09-2009, 02:35 PM

Originally Posted by GsmMobile

N85 Dead USB Flash

Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 06E00117AA7100527D168FF5011B8A5542BD33DD
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.5
Sending CMT RAW Algorithm...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-333_11.047_prd.core.fpsx (CMT)...
RM-333_11.047_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x09F7FFFF, ONENAND
Erase Partition (CMT)
Erase taken 0.922s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 35.578s
Processing RM-333_11.047_009_prd.rofs2.fpsx (CMT)...
RM-333_11.047_009_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
Started flash erase
EraseArea[0,CMT]: 0x07D20000-0x0957FFFF, ONENAND
Erase taken 0.156s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.954s
Restarting CMT...
All images processed OK! Processing after flash tasks...
After flash tasks finished!

hello sir i need video of flashing of dead usb give me link

**gasan** · 30-09-2009, 05:43 PM

can this box also unlock these phones or is it only flashing

**manish_3g** · 16-12-2010, 01:09 PM

sir,

i have tried many phones with cyclone, some thime it works properly but some times with 5130,3110,6300 etc. showz "FBUS error while factory resert or same error while CMT part.

FBUS interface error"

with such errors i can't flash ne phone perfectly. i have to go with mx-key to recover phone. where could be the fault ?

please help me