2100 flashing error in JAF

[everstarnirmal]

hi dears

* i got 2100 set in dead condition

* at first i flash the set after PPM flashing completed this error is coming ( Mbus error )

* i reboll the ic and i again flash set with 5.90 Version

* but still same error is showing

can some one post the solution



thanks in advance....
wbr
Nirmal

[muksforu]

check ur cable connection....

[everstarnirmal]

Hi dears

after pmm flashing ,error is showing


here i post my Log which i flashed in JAF BOX


JAF version 1.98 beta5
Detected PKEY: xxxxxxx
Card life counter: 98.39%
P-key nokia module version 01.00
Detected JAF INTERFACE version: 01.AC
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Booting phone...
BOOT file: C:\Program Files\ODEON\JAF\Flash3\dct3bt2.tia
Boot size is 0x03BC
0x65,0x08
Boot is ready...
Operation took 0 minutes 3 seconds...
Flash ID is 0xEA00B000
ALIAS ID: 90888900
BOOT file: C:\Program Files\ODEON\JAF\Flash3\Iw28f008.tia
Read patch address: 000007F0
Loader size is 0x1610; Loader chk: 9f94
Loader is ready...
Operation took 0 minutes 2 seconds...
Erasing...
Erasing area: 00200000 - 00210000...
Erasing area: 00210000 - 00220000...
Erasing area: 00220000 - 00230000...
Erasing area: 00230000 - 00240000...
Erasing area: 00240000 - 00250000...
Erasing area: 00250000 - 00260000...
Erasing area: 00260000 - 00270000...
Erasing area: 00270000 - 00280000...
Erasing area: 00280000 - 00290000...
Erasing area: 00290000 - 002A0000...
Erasing area: 002A0000 - 002B0000...
Erasing area: 002B0000 - 002C0000...
Erasing area: 002C0000 - 002D0000...
Erasing area: 002D0000 - 002E0000...
Erasing area: 002E0000 - 002F0000...
Erasing area: 002F0000 - 00300000...
Erasing area: 00300000 - 00310000...
Erasing area: 00310000 - 00320000...
Erasing area: 00320000 - 00330000...
Erasing area: 00330000 - 00340000...
Erasing area: 00340000 - 00350000...
Erasing area: 00350000 - 00360000...
Erasing area: 00360000 - 00370000...
Operation took 0 minutes 27 seconds...
Writing...
Operation took 1 minutes 22 seconds...
Erasing...
Erasing area: 00360000 - 00370000...
Erasing area: 00370000 - 00380000...
Erasing area: 00380000 - 00390000...
Erasing area: 00390000 - 003A0000...
Erasing area: 003A0000 - 003B0000...
Erasing area: 003B0000 - 003C0000...
Erasing area: 003C0000 - 003D0000...
Erasing area: 003D0000 - 003E0000...
Erasing area: 003E0000 - 003F0000...
Operation took 0 minutes 11 seconds...
Writing...
Operation took 0 minutes 34 seconds...
Terminate Flash Session...
Setting FaID...
Error auth phone!



( I TRIED IN UFS ALSO IN THAT M BUS ERROR IS SHOWING )


thanks in advance
wbr
nirmal

[shah87n]

TRY BY UFS

FULL ERASE & THEN FLASH 5.49 VERSION

[everstarnirmal]

I Tried In Ufs Also In That M Bus Error Is Showing

[inamimel]

Check Cable. Clean pin pcb. Use UFS. Erase flash addr: 00200000 - 00400000. Then Full flash - Faid - Rebuild IMEI - FFS

[danish jalal]

hi brother ,,,,,, rehot power and flash ic 100% tested




danish_jalal@yahoo.com